SUMMARY

Grohe 46374000 35mm Ohm hand lever cartridge (Grohe Silkmove 35mm ceramic cartridge)

The Grohe 46374000 (43.374) lever cartridge is used in the following Grohe products:

Compatible With
- Grohe Atrio 32003 Single - lever sink mixer 1/2” ValvePARENT-134
- Grohe Atrio 32108 Single - lever bidet mixer 1/2” Valve
- Grohe Atrio 32457 Single - lever basin mixer 1/2” Valve
- Grohe Chiara 32303 Basin mixer 1/2” Valve
- Grohe Chiara 32304 Basin mixer 1/2” Valve
- Grohe Chiara 32305 Bidet mixer 1/2” Valve
- Grohe Concealed body for OHM 32635 Single - lever mixer 1/2” Valve" concealed body
- Grohe Concetto 32204 Basin mixer 1/2” Valve
- Grohe Concetto 32208 Bidet mixer 1/2” Valve
- Grohe Concetto 32629 Basin mixer 1/2” Valve
- Grohe Concetto 32659 Sink mixer 1/2” Valve
- Grohe Concetto 32661 Sink mixer 1/2” Valve
- Grohe Concetto 32663 Sink mixer 1/2” Valve
- Grohe Essence 32105 Sink mixer 1/2” Valve
- Grohe Essence 32171 Sink mixer 1/2” Valve
- Grohe Essence 32247 Basin mixer 1/2” Valve
- Grohe Essence 32628 Basin mixer 1/2” Valve
- Grohe Essence 33532 Basin mixer 1/2” Valve
- Grohe Essence 33562 Basin mixer 1/2” Valve
- Grohe Essence 33603 Bidet mixer 1/2” Valve
- Grohe Euroeco Special 32763 Basin mixer 1/2” Valve
- Grohe Europlus 32612 Basin mixer 1/2” Valve
- Grohe Europlus 32618 Basin mixer 1/2” Valve
- Grohe Europlus 33155 Basin mixer 1/2” Valve
- Grohe Europlus 33163 Basin mixer 1/2” Valve
- Grohe Europlus 33241 Bidet mixer 1/2” Valve
- Grohe Eurosmart 32925 Basin mixer 1/2” Valve
- Grohe Eurosmart 32929 Bidet mixer 1/2” Valve
- Grohe Eurosmart 33284 Basin mixer 1/2” Valve
- Grohe Eurostyle 33557 Single - lever basin mixer 1/2” Valve
- Grohe Eurostyle 33558 Basin mixer 1/2” Valve
- Grohe Eurostyle 33559 Basin mixer 1/2” Valve
- Grohe Eurostyle 33565 Bidet mixer 1/2” Valve
- Grohe Eurostyle 33977 Sink mixer 1/2” Valve
- GROHE Blue Still 31087 Starter kit
- Grohe K4 33782 Sink mixer 1/2” Valve
- Grohe K4 33786 Sink mixer 1/2” Valve
- Grohe Lineare 33848 Bidet mixer 1/2” Valve
- Grohe Quadra 32630 Basin mixer 1/2” Valve
- Grohe Quadra 32631 Basin mixer 1/2” Valve
- Grohe Quadra 32636 Bidet mixer 1/2” Valve
- Grohe Tenso 32427 Basin mixer 1/2” Valve
- Grohe Tenso 33347 Basin mixer 1/2” Valve
- Grohe Tenso 33348 Bidet mixer 1/2” Valve

Frequently Asked Questions: Grohe 46374000 35mm Ohm Cartridge

Question: How can I adjust the cartridge flow rate?
Answer: The flow rate of the Grohe 46374000 can be adjusted by using a 2.5mm Allen key on the hole at the bottom of the cartridge’s lever part. Turn the key clockwise to diminish water flow and anti-clockwise to increase water flow.

Question: Aside from the Grohe 46374000 Ohm cartridge I also need a cleaning solution for removing white stains on a Grohe tap to make like new again. Do you have any?
Answer: Yes, we have: GROHE-48166000. This cleaning spray will safeguard the expensive Grohe tap’s finish from any damage that can be sustained by other chemical or abrasive cleaners.

Removing Various Tap Handles to Install the Grohe 46374000

The Grohe 46374000 35mm Ohm cartridge fits in various Grohe taps among which are the Atrio 32003, Chiara 32303, Concetto 32204, Essence 32105, Europlus 32612, Quadra 32630, and Tenso 32427. The hexagonal key needed for tap repair is 3mm.

1. Grohe Chiara 32303, Grohe Concetto 32204, Grohe Essence 32105, and Grohe Europlus 32612
– The screw is located in front of the tap handle cap and below the handle lever. Remove the screw cover, use a 3mm hexagonal key to remove the grub screw and lift the handle.

2. Grohe Atrio 32003
– Remove the handle’s circular cap, use a 3mm hexagonal key to undo the screw, pull the lever handle to remove.

3. Grohe Quadra 32630 and Grohe Tenso 32427
– The screw can be found at the back of the handle. Remove the screw cover cap and use a 3mm Allen key. Undo the screw and lift the handle to remove.


Need other Grohe replacement parts? Please browse through our catalogue:
+ Grohe shower spares
+ Grohe Rapido T Valve
+ Grohe Avensys Modern Shower Mixer Valve


Should you have any questions about the Grohe 46374000 or need help in spare part identification, please feel free to send us a message. Our friendly UK spares experts will personally respond to your queries.
Queries received during the weekend will be responded to on Monday.

FAST DELIVERY

• Delivery of this item is priced as a 'small' packet. UK delivery costs £5.95.
• For all in-stock spare parts the typical UK delivery timescale is 2-5 working days.
• If you need a part urgently then we can provide a next-day (delivered Mon-Fri) UK delivery service for all in-stock small parcels ordered before 3.30pm, Monday - Friday.
• Next day delivery is available to select at an additional charge during the checkout.
• We delivery WORLDWIDE. For more information about international deliveries, read our delivery page.

RETURNS

• If you need to return a part then please telephone Di Vapor on 0121 705 0866 with the reasons for the return within 14 days of receiving the goods.
• For more information please see our terms and conditions.