Grohe QuickFix Start Wall Mounted Bath Shower Mixer and Kit - 23413002 Spare Parts

SUMMARY

Spares for Grohe QuickFix Start 23413002 Wall Mounted Bath Shower Mixer Kit

GROHE QuickFix Start 23413002 is an exposed wall-mounted single-lever bath shower mixer and hand-shower kit in chrome. It controls mixed hot and cold water for bath filling and showering, with an automatic diverter directing water between the bath spout and shower outlet.

The mixer uses a 35mm ceramic cartridge for lever-operated flow and temperature control. It also incorporates an adjustable flow-rate limiter, temperature limiter, bath-spout mousseur and an integrated non-return valve at the shower outlet.

Technical Details

- - Range: GROHE Start

- - Product family: GROHE QuickFix

- - Category: Bath shower mixer

- - Product code: 23413002

- - EAN: 4005176624087

- - Installation: Exposed wall-mounted

- - Control type: Single lever

- - Mixer type: Non-thermostatic

- - Cartridge: 35mm ceramic cartridge with a production-dependent article code

- - Outlet selection: Automatic bath-to-shower diverter

- - Connection centres: 150mm

- - Approximate spout projection: 188mm

- - Shower outlet connection: 1/2 inch

- - Hot-water supply position: Left

- - Cold-water supply position: Right

- - Finish: Chrome with GROHE LongLife surface

- - Shower kit: 100mm Rain hand shower rated at 5.7 litres per minute

- - Shower hose: 1500mm with 1/2 inch connections

- - Complete mixer status: No longer available

Cartridge Production Check

- - GROHE documentation for production from November 2022 identifies cartridge 46374000.

- - Earlier GROHE documentation identifies cartridge 46589000.

- - Check the mixer's production period or compare the removed cartridge before ordering. The two cartridge codes must not be treated as interchangeable without confirming the installed version.

Common Fault Symptoms

- - Water dripping from the bath spout or shower outlet when the mixer is turned off can indicate a worn or contaminated ceramic cartridge.

- - Water flowing from both outlets or incomplete bath-to-shower switching can indicate wear or debris within diverter 65655000.

- - Reduced bath flow may be caused by scale or debris in the mousseur or inlet strainers.