Grohe 33300002 Eurosmart Single-Lever Bath Mixer (1/​2 Inch) Spare Parts

SUMMARY

Spares for GROHE 33300002 Eurosmart Single-Lever Bath Shower Mixer 1/2 Inch

This page lists spare parts for the GROHE 33300002 Eurosmart single-lever bath/shower mixer. The exposed wall-mounted mixer uses one lever to regulate water flow and temperature and an automatic diverter to direct water between the bath spout and shower outlet.

The mixer uses a 35mm GROHE SilkMove ceramic cartridge. Its adjustable flow-rate limiter and integrated temperature limiter support controlled operation while the non-return valve in the shower outlet helps prevent backflow.

Technical Details

- - Brand: GROHE

- - Model code: 33300002

- - Range: Eurosmart

- - Category: Bath shower mixer

- - Installation type: Exposed wall-mounted

- - Finish: Chrome

- - Inlet connections: G 1/2

- - Shower outlet: G 1/2

- - Inlet centres: 150 +/- 15mm

- - Escutcheon diameter: 70mm

- - Bath spout projection: 126mm

- - Maximum overall projection: 161mm

- - Main cartridge: 35mm GROHE SilkMove ceramic cartridge 46374000

- - Outlet control: Automatic bath/shower diverter 65655000 with chrome knob 65648000

- - Backflow protection: Non-return valve 08565000 in the shower outlet

- - Flow rate: 20 litres per minute at 3 bar

Common Fault Checks

- - Water dripping from the bath spout or shower outlet after the lever is turned off can indicate wear in the 46374000 mixer cartridge.

- - Incomplete switching between the bath and shower outlets or water discharging from both outlets can indicate a problem with the 65655000 diverter or 65648000 operating knob.

- - Backflow through the shower connection can indicate that the 08565000 non-return valve requires inspection or replacement.

Before You Order Check

Confirm that the mixer is marked with product code 33300002 and compare the required spare with the existing component before ordering. GROHE Eurosmart mixers can use different cartridges, trim parts and diverter components across model codes and production changes, so the part should not be selected by appearance alone.