VOLA VR3277K Thermostatic Cartridge (Hastings) - Compatible Spare. The VR3277K cartridge controls water flow and water temperature in the shower valve, therefore if your shower is experiencing poor performance in water mixing or if it is dripping, t...

Vola VR16L5 is a 5 L/min tap aerator insert for selected VOLA tap spouts, basin mixers and basin pillar tap outlets. It is used at the outlet to help regulate the water stream and flow rate from the tap spout.The VR16L5 aerator insert is also identif...

35mm Cartridge for Vola / Hastings VR1277K (No Hex Piece)This 35mm lever cartridge is used in Vola / Hastings one-handle mixer valve assemblies that use part VR1277K. It controls the mixed water flow through the single lever mechanism and is supplied...

The Vola VR5257+10 spline extender is a VOLA extension piece for concealed shower mixer and diverter control assemblies where the external handle connection needs a +10 extension. The Di Vapor Part Number for this item is VR5257+10, while the VOLA ex...

The Vola NR51-40 is a brushed stainless steel on/off control handle for Vola Series 5000 shower and bath mixer assemblies. NR51 is the Vola on/off handle reference for Series 5000, while NR51-40 identifies the brushed stainless steel finish version.T...

Vola VR3279B Chrome Shroud - VR3279B-16.This shroud is 16mm in height.Vola VR3279B is a chrome shroud ring for the VOLA NR28 operating handle assembly used on selected VOLA built-in one-handle mixer and diverter installations.This trim ring is used d...

The Vola / Hastings VR5277LK is a replacement thermostatic cartridge used as the temperature control cartridge in selected VOLA thermostatic mixer valves. It controls the blend of hot and cold water inside the valve to help restore stable showering t...

Vola VR1400 Diverter. You will receive the part highlighted in green.Vola VR1400 is a diverter cartridge / diverter spindle used in selected VOLA built-in mixer diverter assemblies and separate diverter assemblies. It is the internal diverter part u...

The Vola VR5250 is an extension adapter kit for Vola concealed thermostatic mixer handle assemblies. It is used where the finished wall depth or retrofit installation position requires the exposed handle assembly to be brought forward correctly after...

28mm Lever Cartridge for Vola VR277K - VR269 Fixing Nut NOT Included - Compatible Spare. This cartridge is used in Vola HV1 and other tap mixers.This 28mm lever cartridge is a Hastings compatible spare for Vola VR277K tap mixer applications. It is us...

The Vola VR692K Ceramic Flow Cartridge (Hastings) - Hot Side is a hot-side quarter turn ceramic cartridge used in Vola mixer tap and stop-valve applications that use the S50H / S50DH hot ceramic stop valve arrangement.This cartridge controls hot wate...

Vola VR296-CP is a compatible retaining nut for the Vola VR277K cartridge arrangement used in selected Vola mixer tap spares. It is the retaining component ordered when the existing VR296 retaining nut is missing, damaged or no longer securing the ca...

Vola VR2205 is a threaded collar for the diverter assembly used with selected Vola build-in mixer diverters. It is also referred to as a diverter housing and is ordered as the separate VR2205 collar where the Vola VR1400 diverter arrangement requires...

Vola VR624C is an aerator insert used in selected VOLA tap and bath spout outlet assemblies. It sits at the outlet end of the spout to mix air into the water stream and help produce a controlled flow pattern.This part is typically checked or replaced...

Vola VR2279-16 is a chrome 16mm shroud ring used with the VOLA NR21 flow control handle assembly on selected VOLA one-handle built-in mixer valves. This is an external trim and clamping ring for the handle area, not an internal cartridge, diverter or...

The Vola VR691K Ceramic Cartridge Hastings Cold Side is a quarter turn ceramic flow cartridge used to control cold water flow in selected VOLA mixer taps and ceramic stop-valve assemblies.This cartridge opens anti-clockwise and closes clockwise, help...

Vola NR21-16 Chrome Flow Control Handle is the polished chrome NR21 operating handle used on selected VOLA one-handle mixer valve assemblies. Di Vapor lists this spare with Part Number NR21 and the NR21-16 finish variant identifies the chrome version...

The Vola VR3279-16 is a chrome shroud ring used as a trim spacing component on selected VOLA concealed mixer and shower valve assemblies. This is not a cartridge or operating valve part; it is an exposed trim/shroud component used around the control ...

The Vola VR5410 is a diverter assembly for Vola 5400 and 5600 build-in mixer systems from 01/01/2018. It is used in the diverter section of the concealed mixer to direct water between the available outlets, depending on the model layout and trim arra...

The Vola / Hastings VR5277K thermostatic cartridge replacement is a temperature control cartridge for selected VOLA thermostatic mixer valves and is cross-referenced with VR5277LK on the Di Vapor listing.This cartridge regulates the blended outlet te...