Thermostatic Cartridge for VADO HUB-001A-WAX WG-15951 | WSB-148 Shower Mixers
This is a thermostatic cartridge suitable for VADO shower mixers which use the HUB-001A-WAX cartridge. If you require the temperature handle for this cartridge, the part you need is here: Vado HUB-PB3B-C/P Temperature Handle.
Take these following steps to determine whether you need a replacement HUB-001A-WAX for your Vado mixer:
1. Make sure there is a constant hot feed entering the valve.
2. Make sure there isn't anything blocking the gauze filters of the Vado HUB-001A-WAX thermostatic cartridge. If there is anything blocking them, this can restrict water flow into the cartridge and therefore affect performance.
If you have checked those two areas, then the most likely suspect is the Vado HUB-001A-WAX thermostatic cartridge.
Replacing the Vado HUB-001A-WAX thermostatic cartridge is a straight forwards process and is just a matter of unscrewing the old cartridge, replacing it and calibrating the temperature to 38 degrees.
Note: This cartridge can vary in design. Any changes on the cartridge do not affect the compatibility or functionality of the cartridge.
Need help? Send a photo of the thermostatic cartridge you have to our Find a Part page and we'll tell you what cartridge you need to order.
| Cartridge Length | 104mm |
|---|---|
| Diameter | 36mm |
| Number of O'Rings | 3 |
| Material | Brass |
| Type | Screw in |
| Gauze Filters | 2 |
HUB-001A-WAX replacement thermo cartridge is a screw fit installation and is used in the following Vado thermostatic shower valves:
Need more Vado shower spare parts?
+ Please browse through our Vado spares catalogue.
+ Purchase spares and the Vado HUB-001A-WAX on a weekday (before 3 PM) and it will be shipped out on the same business day.
We accept the following payment methods:
We use industry-standard payment systems to help keep your payment information secure. Our website and payment processes are regularly checked to maintain PCI security standards.