A961640NU Ideal Standard /​ Trevi O Ring For 1/​2" Inch Cartridge

SUMMARY

Ideal Standard Trevi A961640NU O-Ring Seal Pair for Taps Bath Mixers and Shower Valves

NOTE: For 1/2" Inch Cartridge. 2 o'ring seals are included.

Ideal Standard / Trevi A961640NU is supplied as a pair of O-ring seals used within a range of Ideal Standard, Trevi, Armitage Shanks and Sottini taps, bath mixers and shower valves.

The O-rings provide a watertight seal at internal cartridge, connector or valve-body joints, depending on the assembly in which they are fitted. Worn, flattened or damaged seals can allow water to pass around the joint and should be replaced with the correct part for the tap or valve.

Technical Details

- - Part number: A961640NU

- - Manufacturer alternative code format: A 961 640 NU

- - Part type: O-ring seal pair

- - Quantity supplied: 2 O-rings

- - Application: Internal sealing in selected taps, bath mixers and shower valves

- - No hot or cold handed orientation

Check the original part code or exact tap or valve model before ordering. O-rings are not universal and this seal should not be selected by diameter alone.

When fitting, clean the sealing groove and mating surface before installing the new O-ring. A light coating of suitable silicone grease can help lubricate the seal during assembly.

Confirmed Compatible Models Using A961640NU O-Ring Pair

- - Armitage Shanks A4128AA Contour 21 dual-control exposed thermostatic bath shower mixer

- - Ideal Standard A6353AA Tonic II dual-control bath filler

- - Ideal Standard A6590AA Tesi two-hole bath filler

- - Ideal Standard B9493AA Ceramix Blue single-lever shower mixer

- - Sottini N9668AA Reprise dual-control basin mixer

- - Sottini A6631AA Turano dual-control two-hole bath filler

- - Armitage Shanks A4127AA Contour 21 dual-control exposed thermostatic shower valve

- - Sottini A6520AA Lambro two-hole bath filler

- - Ideal Standard B1147AA Calista bath pillar taps

- - Sottini N9669AA Reprise dual-control three-taphole bidet mixer with pop-up waste

- - Ideal Standard A6300AA Strada two-hole bath filler

- - Ideal Standard A6591AA Tesi two-hole bath shower mixer

- - Armitage Shanks S7833AA Sandringham built-in manual shower valve

- - Trevi A4000AA Blend built-in single-lever manual shower valve

- - Trevi Blend A4100 / A4110 exposed shower valves

- - Ideal Standard B9570AA Cerasprint exposed shower mixer

- - Ideal Standard B0716AA Ceraplan III exposed shower mixer

- - Ideal Standard B0717AA Ceraplan III exposed shower mixer

- - Ideal Standard A7121AA Edge exposed bath shower mixer

- - Ideal Standard A7122AA Edge exposed bath shower mixer

- - Ideal Standard BC118AA CeraPlus 2 shower mixer

- - Ideal Standard BC499AA Cerafine O exposed shower mixer

- - Ideal Standard BC493AA Cerafine D exposed shower mixer

- - Ideal Standard BC649AA Alpha basin mixer

- - Ideal Standard BC661AA Alpha kitchen mixer

- - Ideal Standard B1423AA Alpha two-handle shower mixer

- - Ideal Standard B1717AA Ceraflex basin mixer

- - Ideal Standard B1722AA Ceraflex bath shower mixer

- - Ideal Standard B1730AA Ceraflex sink mixer

- - Ideal Standard Ceraflex BC954AA

- - Ideal Standard Ceraflex BC959AA

- - Ideal Standard Ceraflex B5128AA

- - Ideal Standard A7031AA Connect Air / Concept Air slim pillar tap

- - Ideal Standard A7031GN Connect Air / Concept Air slim pillar tap

- - Ideal Standard A7031A2 Connect Air / Concept Air slim pillar tap

- - Ideal Standard B0728AA Tempo basin pillar taps

- - Ideal Standard B8599AA Slimline II kitchen mixer

- - Ideal Standard A4089AA CeraPlus thermostatic bath shower mixer

- - Ideal Standard A4094AA CeraPlus exposed thermostatic bath shower mixer

- - Ideal Standard Joy Neo BD158XX

- - Ideal Standard Joy Neo BD159XX

- - Ideal Standard Extra BD512XX

Related Spares You May Need

- - TACSIL 3g Premium Cartridge Silicone Grease - WRAS Approved - Part Number: TAC86

Not sure this is the right seal? Use the Di Vapor part identification service and we can help.

FAST DELIVERY

• Delivery of this item is priced as a 'TBC'. UK delivery costs £TBC incl. VAT.
• For all in-stock spare parts the typical UK delivery timescale is 2-5 working days.
• If you need a part urgently then we can provide a next-day (delivered Mon-Fri) UK delivery service for all in-stock small parcels ordered before 3.00pm, Monday - Friday.
• Next day delivery is available to select at an additional charge during the checkout.
• We delivery WORLDWIDE. For more information about international deliveries, read our delivery page.

RETURNS

• If you need to return a part then please telephone Di Vapor on 0121 705 0866 with the reasons for the return within 14 days of receiving the goods.
• For more information please see our terms and conditions.