Ideal Standard E960583NU 1/​2" On/​Off Ceramic Disc Flow Cartridge (Clockwise Close) - Cold

SUMMARY

E960583NU Ideal Standard / Trevi Waterways 1/2 Inch SE On/Off Ceramic Disc Flow Cartridge (Clockwise Close) - Cold Side

The E960583NU is used in the following valves:

- - Ideal Standard B5105AA Cone pair basin taps

- - Ideal Standard E0106AA Academy dual control one taphole basin mixer with pop-up waste

- - Ideal Standard E0116AA Academy dual control one taphole bidet mixer with pop-up waste

- - Ideal Standard E0166AA Academy pair basin taps

- - Ideal Standard E0206AA Academy dual control one taphole sink mixer

- - Ideal Standard E0625AA Waterways Q/T dual control one taphole quarter turn basin mixer with swivel spout and pop-up waste - no handles

- - Ideal Standard E0655AA Waterways Q/T pair quarter turn basin taps - no handles

- - Ideal Standard E0675AA Waterways Q/T dual control one taphole quarter turn basin mixer with fixed spout and pop-up waste - no handles

- - Ideal Standard E0685AA Waterways Q/T dual control one taphole quarter turn basin filler with fixed spout and pop-up waste - no handles

- - Ideal Standard E0695AA Waterways Q/T dual control one taphole quarter turn bidet mixer with pop-up waste - no handles

- - Ideal Standard E1515AA Tantadisc Basin Pillar Taps Rim Mounted

- - Ideal Standard E1735AA Tantadisc Basin Mixer Rim Moutned 1 Hole With Pop Up Waste

- - Ideal Standard E1952AA Alchemy dual control one taphole basin mixer with pop-up waste - crosshead handles

- - Ideal Standard E1953AA Alchemy dual control one taphole basin mixer with pop-up waste - lever handles

- - Ideal Standard E1961AA Alchemy dual control wall basin mixer - lever handles

- - Ideal Standard E1962AA Alchemy dual control wall basin mixer - crosshead handles

- - Ideal Standard E6043AA Ardenne dual control one taphole sink mixer

- - Ideal Standard E6135AA Affinity dual control one taphole sink mixer - crosshead handles

- - Ideal Standard E6136AA Affinity dual control one taphole sink mixer - lever handles

- - Ideal Standard E7834AA Affinity dual control two taphole bridge sink mixer - lever handles

- - Ideal Standard N9668AA Reprise dual control three taphole basin mixer with pop-up waste A963003NU Pre 2001 E960583NU Post 2001

- - Ideal Standard N9669AA Reprise dual control three taphole bidet mixer with pop-up waste

- - Ideal Standard S7021AA Accolade Q/T pair quarter turn basin taps - chrome handles

- - Ideal Standard S7091AA Sandringham rim mouted bath pillar taps with acrylic handles

- - Ideal Standard S7092AA Sandringham Bath Pillar Taps

- - Ideal Standard S7106AA Nuastyle pair basin taps with anti vandal indices - lever handles

- - Ideal Standard S7107AA Nuastyle pair bath taps with anti vandal indices - lever handles

- - Ideal Standard S7118AA Sandringham Basin Bh Pillar Taps £53.14

- - Ideal Standard S7119AA Sandringham Bath Bh Pillar Taps

- - Ideal Standard S7131AA Sandringham Crosshead pair standard basin taps - crosshead handles

- - Ideal Standard S7132AA Sandringham Crosshead pair standard bath taps - crosshead handles

- - Ideal Standard S7346AA Accolade Q/T dual control one taphole quarter turn basin mixer with pop-up waste

- - Ideal Standard S7694AA Sandringham Bath Shower Mixer Rim Mounted

- - Ideal Standard S7706AA Sandringham Bath Shower Mixer Rim Mounted

- - Ideal Standard S7721AA Sandringham Crosshead dual control two taphole standard bath shower mixer complete with shower kit - crosshead handles

- - Ideal Standard S7934AA Sandringham Sink Mixer Rim Mounted 2Th Ah

The Ideal Standard E960583NU is a 1/2 inch SE ceramic disc on/off flow cartridge for the specified basin taps, bidet mixers, kitchen taps and bath/shower mixers. This quarter-turn tap headwork closes clockwise and opens anticlockwise.

The hot or cold position depends on the fitting and handle arrangement. Match the closing direction, spindle and dimensions of the removed cartridge to the exact tap model.

Water continuing to drip from the spout or shower outlet when the control is fully off can indicate worn ceramic discs or seals.

Technical Details

- - Nominal headwork size: G1/2 - 1/2 inch SE

- - Operation: quarter turn - 90 degrees

- - Closing direction: clockwise

- - Opening direction: anticlockwise

- - Total length: 56.7mm

- - Number of splines: 18

- - Top spindle length: 25.1mm

- - Top spindle width: 7.7mm

- - Width at widest point: 23.8mm

- - Thread width below the O-ring: 20.8mm

Check Before Ordering

This is the 56.7mm SE cartridge. The shorter A954360NU11 TX cartridge measures approximately 52mm to 53mm and belongs to a different headwork family. Match the original cartridge and exact fitting before ordering.

For Reprise, use the post-2001 SE arrangement specified below. The earlier pre-2001 Reprise headwork is A963003NU. Check the production generation and the cartridges fitted to both controls.

Confirmed Models Using Cartridge E960583NU

- - Ideal Standard B5105AA Cone basin pillar taps

- - Ideal Standard E0106AA Academy one-hole basin mixer with pop-up waste

- - Ideal Standard E0116AA Academy one-hole bidet mixer with pop-up waste

- - Ideal Standard E0625AA Waterways basin mixer with swivel spout and pop-up waste

- - Ideal Standard E0655AA Waterways basin pillar taps

- - Ideal Standard E0675AA Waterways basin mixer with fixed spout and pop-up waste

- - Ideal Standard E0685AA Waterways basin filler with fixed spout and pop-up waste

- - Ideal Standard E0695AA Waterways bidet mixer with pop-up waste

- - Sottini E1952AA Alchemy basin mixer with crosshead handles

- - Sottini E1961AA Alchemy wall basin mixer with lever handles

- - Sottini E1962AA Alchemy wall basin mixer with crosshead handles - crosshead arrangement uses two E960583NU cartridges

- - Ideal Standard E6135AA Affinity one-hole kitchen mixer with crosshead handles

- - Ideal Standard E6136AA Affinity one-hole kitchen mixer with lever handles

- - Ideal Standard E7834AA Affinity two-hole bridge kitchen mixer with lever handles

- - Sottini N9668AA Reprise three-hole basin mixer with pop-up waste - post-2001 SE arrangement only; uses two E960583NU cartridges

- - Sottini N9669AA Reprise three-hole bidet mixer with pop-up waste - for the post-2001 Reprise SE arrangement; check the existing headworks; uses two E960583NU cartridges

- - Armitage Shanks S7706AA Sandringham BH bath/shower mixer

- - Armitage Shanks S7721AA Sandringham crosshead bath/shower mixer

- - Armitage Shanks S7934AA Sandringham AH two-hole kitchen sink mixer

- - Ideal Standard B0168AA Senses Sphere basin pillar taps

Related Spares You May Need

Choose related spares for your exact model and the component being repaired. Handle parts, seals, aerators and other assembly spares vary between fittings and are not all required for a cartridge change. Retain the post-2001 SE condition for the Reprise applications listed above.

- - A922539NU11 Dekora cartridge-to-handle adapter - for the specified Academy and Waterways handle arrangements

- - E960582NU 1/2 inch SE anticlockwise-close cartridge - opposite-closing headwork for fittings that require it

- - S960025NU pair of 1/2 inch SE ceramic disc cartridges - contains one E960583NU and one E960582NU; not a pair of clockwise-close cartridges

- - TAC86 TACsil 3g cartridge silicone grease - for seal lubrication where specified by the fitting instructions

- - A90609014 M8 brass fixing nut - for Waterways E0695AA

- - A909938AA11 chrome M5 pop-up knob - for Waterways E0625AA

- - A915768 spring ring - for Alchemy E1961AA and E1962AA

- - A91831914 M4 taper-shoulder slotted screw - for Cone B5105AA, Senses B0168AA, Alchemy E1961AA and E1962AA, and Sandringham S7706AA

- - A922539 Dekora handle carrier adapter - match the original carrier code and handle arrangement

- - A923787AA chrome M24x1-B aerator - for the specified Academy, Waterways and Reprise assemblies

- - A951565NU11 Academy basin/bidet fixing kit - for E0106AA and E0116AA

- - A960321AA tap aerator - optional aerator for Cone B5105AA and Senses B0168AA

- - A960386NU M24x1 aerator - for the specified Alchemy spouts from 2007

- - A960412NU M24x1 flow straightener and key - for the specified Alchemy spouts from 2007

- - A961172NU pop-up rod fixing clip - for Reprise N9668AA

- - A961302NU central sealing gasket - for the specified Waterways basin and bidet mixers

- - A961640NU cartridge O-ring pack - for Reprise N9668AA and N9669AA

- - A962713NU flow straightener insert - for Waterways E0625AA

- - A962963NU spout O-ring - for Reprise N9668AA

- - A962964NU Reprise bridging piece - for N9668AA

- - A962974AA chrome Waterways flow straightener - for the specified E0675AA and E0685AA assemblies

- - A962998NU pair of Reprise M4 cartridge screws - for N9668AA and N9669AA

- - A963005NU Reprise bridging-piece fixing set - for N9668AA

- - A963007NU Reprise plug - for N9668AA

- - A963196NU cartridge spline adapter - for Cone B5105AA

- - B960299AA chrome pillar-tap handle body - for Cone B5105AA and Senses Sphere B0168AA

- - B960480NU 1/2 inch connecting group - for Cone B5105AA and Senses Sphere B0168AA basin taps

- - B960745NU M5 x 5 cup-point grub screw - for Alchemy E1961AA and E1962AA

- - B960754AA 5 litre/minute regulated aerator - for Waterways E0625AA

- - E4745AA 1.35m chrome Easyclean shower hose - for Sandringham S7706AA and S7721AA

- - E908811AA11 chrome pop-up waste knob - for Academy E0106AA and E0116AA

- - E908824AA Academy handle index ring - for E0106AA and E0116AA

- - E910030NU blue index ring - for the specified Waterways E0675AA, E0685AA and E0695AA assemblies

- - E910031NU red index ring - for the specified Waterways E0675AA, E0685AA and E0695AA assemblies

- - E912779NU 38 x 2.5mm O-ring - for Academy E0106AA and E0116AA

- - E91830267 M4 x 4 grub screw - for Alchemy E1961AA and E1962AA

- - E918322NU M4 x 9.5mm screw - for Academy E0106AA and E0116AA

- - E960005AA spout repair kit - for Alchemy E1952AA and Affinity E6135AA, E6136AA and E7834AA

- - E960016NU 5mm long-arm hex key - for Academy E0106AA and E0116AA

- - E960062NU 2mm Allen key - for Alchemy E1961AA and E1962AA

- - E960087AA chrome Academy handle - for E0106AA and E0116AA

- - E960112NU 1/2 inch brass backnut - for Cone B5105AA, Senses B0168AA and Sandringham S7934AA

- - E960375NU spout O-ring repair kit - for the specified Waterways E0625AA and E0675AA assemblies

- - E960517NU pair of M12 inlet tails - for the specified Academy and Waterways mixers

- - E960540NU stainless steel pop-up rod - for Academy E0106AA and E0116AA

- - EEM13490001 white shower hose bracket - for Sandringham S7706AA and S7721AA

- - EEM134901AA chrome shower hose bracket - for Sandringham S7706AA and S7721AA

- - EESM40700067 1/2 BSP plastic tap backnut - for Waterways E0655AA, Affinity E7834AA and Sandringham S7934AA

- - EESM40710067 3/4 BSP plastic tap backnut - for Sandringham S7706AA and S7721AA

- - N058094AA chrome Reprise index - for N9668AA and N9669AA

- - N058997NU plastic handle adapter - for Reprise N9668AA and N9669AA

- - S960059NU indicator pin pack - for the specified Alchemy, Cone and Senses handle arrangements

- - S960164AA chrome shower station - for Sandringham S7706AA and S7721AA

- - S960172NU flexible inlet hose assembly - for Alchemy E1952AA and Affinity E6135AA and E6136AA

- - S961333AA chrome bath/shower diverter - for Sandringham S7706AA and S7721AA

For help finding the right part, use our part identification service.

FAST DELIVERY

• Delivery of this item is priced as a 'small packet'. UK delivery costs £5.95 incl. VAT.
• For all in-stock spare parts the typical UK delivery timescale is 2-5 working days.
• If you need a part urgently then we can provide a next-day (delivered Mon-Fri) UK delivery service for all in-stock small parcels ordered before 3.00pm, Monday - Friday.
• Next day delivery is available to select at an additional charge during the checkout.
• We delivery WORLDWIDE. For more information about international deliveries, read our delivery page.

RETURNS

• If you need to return a part then please telephone Di Vapor on 0121 705 0866 with the reasons for the return within 14 days of receiving the goods.
• For more information please see our terms and conditions.