Hansgrohe 36391000 Ecostat Temperature Control Handle
The Hansgrohe 36391000 is a chrome thermostat temperature-control handle for the AXOR Allegroh Novo concealed thermostatic mixer and the confirmed Pharo Aquafun and Bath-Shower Combination systems listed below. It provides the user interface for selecting and adjusting the mixed-water temperature at the thermostatic control.
The handle fits over the thermostat control interface and should be selected by the exact mixer or shower-system model rather than by appearance alone. Check the spindle adapter and fixing arrangement when replacing a damaged, loose or non-engaging handle, as associated interface parts may also require attention.
| Manufacturer code | 36391000. |
|---|---|
| Part type | thermostat temperature-control handle. |
| Range | AXOR Allegroh Novo. |
| Finish | chrome. |
| Application | concealed thermostatic mixer and documented Pharo shower and bath-shower systems. |
| Older production fitting, shown before June 2013 | 3 mm hex fixing, tightened to 2 Nm. |
| Later production fitting, shown from July 2013 | revised push-fit attachment arrangement. |
| Calibration position | align the handle at 38 degrees C after checking and setting the outlet temperature. |
| Supersession status | no replacement or superseding code has been confirmed for 36391000. |
For an uncertain identification, compare the complete control, removed handle, attachment method and any visible codes before ordering.
We accept the following payment methods:
We use industry-standard payment systems to help keep your payment information secure. Our website and payment processes are regularly checked to maintain PCI security standards.