Hansgrohe 98158000 39x2mm O-Ring
SUMMARY
Hansgrohe 98158000 39x2mm O-Ring for Kitchen Mixers Basin Mixers Bath Mixers and Concealed Thermostats
The Hansgrohe 98158000 is an individual 39x2mm O-ring used at model-specific sealing points within selected Hansgrohe and AXOR kitchen mixers, concealed wall-mounted basin mixers, bath mixers and concealed thermostatic controls.
It seals the joint shown in the relevant exploded diagram. A flattened, split or damaged ring can allow water to pass the joint, and replacing the seal can restore the intended watertight connection when the model and installation position are correctly identified.
Technical Details
- - Brand: Hansgrohe
- - Part code: 98158000
- - Part type: individual O-ring sealing ring
- - Nominal size: 39x2mm
- - Pack quantity: 1
- - Installation position: varies by mixer or thermostat and must be checked against the correct spare-parts diagram
- - Supersession status: no replacement or superseding code was identified
Confirmed Compatible Models
- - Hansgrohe Zesis M33 single lever kitchen mixer 74801000 - construction from 12/21
- - Hansgrohe Zesis M33 single lever kitchen mixer with sBox Lite 74804000 - construction from 01/22
- - Hansgrohe Zesis M33 single lever kitchen mixer 74805000 - installation in front of a window
- - Hansgrohe Zesis M33 single lever kitchen mixer 74822000 - metal pull-out spray 2jet
- - Hansgrohe Talis S concealed wall-mounted basin mixer 72111001 - Chrome
- - Hansgrohe Talis S concealed wall-mounted basin mixer 72111821 - Brushed Nickel
- - Hansgrohe Talis S concealed wall-mounted basin mixer 72117009
- - Hansgrohe Talis S concealed wall-mounted basin mixer 72118009
- - Hansgrohe Ecostat S concealed thermostatic mixer 15711000 - construction 05/05 - 06/08
- - Hansgrohe Metris Ecostat E concealed thermostatic mixer 31570000 - construction 09/11 - 12/17
- - AXOR Montreux concealed thermostat with cross handle 16810820 - construction from 05/11
- - AXOR Citterio concealed thermostatic mixer with cross handle 39715000 - construction 04/03 - 06/08
- - AXOR Citterio M concealed thermostat with shut-off valve 34705000 - construction 06/11 - 08/13
- - AXOR Citterio M concealed thermostat 34715000 - construction from 09/12
- - AXOR Uno concealed thermostat 38375000 - construction 07/08 - 05/11
- - AXOR Uno concealed thermostat 38375000 - construction from 09/12
- - AXOR Uno concealed thermostat with shut-off valve 38700000 - construction 05/02 - 06/08
- - AXOR Uno concealed thermostat with shut-off/diverter valve 38720000 - construction 07/08 - 04/11
- - AXOR Uno concealed thermostat with shut-off/diverter valve 38720000 - construction from 09/12
- - AXOR Starck concealed thermostat with shut-off valve 10700000 - construction 07/08 - 05/11
- - AXOR Starck concealed thermostat with shut-off valve 10700000 - construction from 06/11
- - AXOR Starck X concealed thermostat with shut-off valve 10706000 - construction 07/08 - 04/11
- - AXOR Starck concealed thermostat 10710000 - construction 07/08 - 05/11
- - AXOR Starck concealed thermostat 10710000 - construction from 06/11
- - AXOR Starck X concealed thermostat 10716000 - construction 04/05 - 06/08
- - AXOR Starck X concealed thermostat 10716000 - construction from 07/08
- - AXOR Starck X concealed thermostat 10716820 - construction from 06/17
- - AXOR Starck concealed thermostat with shut-off/diverter valve 10720000 - construction 07/08 - 05/11
- - AXOR Starck X concealed thermostat with shut-off/diverter valve 10726000 - construction from 05/11
- - AXOR Starck 2-handle bath mixer 10430000 - construction 07/00 - 07/08
- - AXOR Carlton concealed thermostatic mixer with lever handle 17710000 - construction 04/01 - 06/08
- - AXOR Massaud concealed thermostat 18740000 - construction 07/06 - 06/08
Before Ordering
- - Match the full product article number and construction period before ordering because the same model code can have different spare assemblies in different production periods.
- - Do not order solely by the 39x2mm measurement because O-rings of the same nominal size are not automatically interchangeable between unrelated products.
- - Check the removed seal and the exact position shown in the relevant exploded diagram.
Installation Note
Isolate the water supply before dismantling the product. Clean the O-ring groove, avoid twisting or pinching the new seal and apply a light film of suitable silicone grease to help it seat correctly.
Related Spares You May Need
- - TACSIL 3g Premium Cartridge Silicone Grease - WRAS Approved - Part Number: TAC86
If the product article number or seal position cannot be identified with certainty, use Di Vapor's part identification service before ordering.
FAST DELIVERY
- Delivery of this item is priced as a 'small packet'. UK delivery costs £5.95 incl. VAT.
- This item will be dispatched from our UK warehouse in approximately 100 days. If you need this item urgently then please contact our office for availability.
- We delivery WORLDWIDE. For more information about international deliveries, read our delivery page.
RETURNS
- If you need to return a part then please telephone Di Vapor on 0121 705 0866 with the reasons for the return within 14 days of receiving the goods.
- For more information please see our terms and conditions.
Payment Methods
Di Vapor accepts the following payments methods:
- Visa
- Mastercard
- Paypal
- Maestro
- Discover
- JCB, Diners Club, EnRoute
- American Express (via PayPal guest checkout only)
- Cheque (must be cleared before dispatch)
- BACS
SECURITY
Di Vapor treats your privacy and security with the utmost importance. The payment systems used by Di Vapor are based on industry standards to ensure all payments are securely handled. In fact, we ensure the Di Vapor website is regularly checked to guarantee compliance to PCI security standards.
