E960582NU Ideal Standard 1/​2" Flow Ceramic Disc Cartridge (On/​Off) - Anti-Clockwise Close

SUMMARY

Ideal Standard E960582NU 1/2 Inch Ceramic Disc Flow Cartridge Anti-Clockwise Close

The E960582NU is used in the following valves:

- - Ideal Standard B5105AA Cone pair basin taps

- - Ideal Standard E0106AA Academy dual control one taphole basin mixer with pop-up waste

- - Ideal Standard E0116AA Academy dual control one taphole bidet mixer with pop-up waste

- - Ideal Standard E0166AA Academy pair basin taps

- - Ideal Standard E0206AA Academy dual control one taphole sink mixer

- - Ideal Standard E0625AA Waterways Q/T dual control one taphole quarter turn basin mixer with swivel spout and pop-up waste - no handles

- - Ideal Standard E0655AA Waterways Q/T pair quarter turn basin taps - no handles

- - Ideal Standard E0675AA Waterways Q/T dual control one taphole quarter turn basin mixer with fixed spout and pop-up waste - no handles

- - Ideal Standard E0685AA Waterways Q/T dual control one taphole quarter turn basin filler with fixed spout and pop-up waste - no handles

- - Ideal Standard E0695AA Waterways Q/T dual control one taphole quarter turn bidet mixer with pop-up waste - no handles

- - Ideal Standard E1515AA Tantadisc Basin Pillar Taps Rim Mounted

- - Ideal Standard E1735AA Tantadisc Basin Mixer Rim Moutned 1 Hole With Pop Up Waste

- - Ideal Standard E1952AA Alchemy dual control one taphole basin mixer with pop-up waste - crosshead handles

- - Ideal Standard E1953AA Alchemy dual control one taphole basin mixer with pop-up waste - lever handles

- - Ideal Standard E1961AA Alchemy dual control wall basin mixer - lever handles

- - Ideal Standard E1962AA Alchemy dual control wall basin mixer - crosshead handles

- - Ideal Standard E6043AA Ardenne dual control one taphole sink mixer

- - Ideal Standard E6135AA Affinity dual control one taphole sink mixer - crosshead handles

- - Ideal Standard E6136AA Affinity dual control one taphole sink mixer - lever handles

- - Ideal Standard E7834AA Affinity dual control two taphole bridge sink mixer - lever handles

- - Ideal Standard N9668AA Reprise dual control three taphole basin mixer with pop-up waste A963003NU Pre 2001 E960583NU Post 2001

- - Ideal Standard N9669AA Reprise dual control three taphole bidet mixer with pop-up waste

- - Ideal Standard S7021AA Accolade Q/T pair quarter turn basin taps - chrome handles

- - Ideal Standard S7091AA Sandringham rim mouted bath pillar taps with acrylic handles

- - Ideal Standard S7092AA Sandringham Bath Pillar Taps

- - Ideal Standard S7106AA Nuastyle pair basin taps with anti vandal indices - lever handles

- - Ideal Standard S7107AA Nuastyle pair bath taps with anti vandal indices - lever handles

- - Ideal Standard S7118AA Sandringham Basin Bh Pillar Taps

- - Ideal Standard S7119AA Sandringham Bath Bh Pillar Taps

- - Ideal Standard S7131AA Sandringham Crosshead pair standard basin taps - crosshead handles

- - Ideal Standard S7132AA Sandringham Crosshead pair standard bath taps - crosshead handles

- - Ideal Standard S7346AA Accolade Q/T dual control one taphole quarter turn basin mixer with pop-up waste

- - Ideal Standard S7694AA Sandringham Bath Shower Mixer Rim Mounted

- - Ideal Standard S7706AA Sandringham Bath Shower Mixer Rim Mounted

- - Ideal Standard S7721AA Sandringham Crosshead dual control two taphole standard bath shower mixer complete with shower kit - crosshead handles

- - Ideal Standard S7934AA Sandringham Sink Mixer Rim Mounted 2Th Ah

Ideal Standard E960582NU is a 1/2 inch SE ceramic disc flow cartridge used to control on/off water flow in selected Ideal Standard, Trevi, Armitage Shanks and Sottini dual-control taps and mixers. It operates by quarter turn and closes anti-clockwise.

A worn or damaged flow cartridge can cause poor shut-off or water continuing to drip from the tap spout after the tap has been turned off. E960582NU is the anti-clockwise-close cartridge; the corresponding clockwise-close cartridge is E960583NU, and both cartridges are supplied together as S960025NU.

Technical Details

- - Part number: E960582NU

- - Manufacturer's alternative code format: E 960 582 NU

- - Cartridge type: 1/2 inch SE ceramic disc flow cartridge

- - Function: on/off water flow control

- - Operation: quarter turn

- - Closing direction: anti-clockwise close

- - Installation type: screw-in

- - Total length: 56.7mm

- - Number of splines / teeth: 18

- - Top spindle length: 25.1mm

- - Top spindle width: 7.7mm

- - Width at widest point: 23.8mm

- - Width at thread below O-ring: 20.8mm

Do not identify this cartridge by the 1/2 inch connection alone. Check the overall length, spline count, spindle dimensions and closing direction against the cartridge being removed before ordering.

Confirmed Compatible Models

- - Ideal Standard B5105AA Cone pair basin taps

- - Ideal Standard E0106AA Academy dual-control one-taphole basin mixer with pop-up waste

- - Ideal Standard E0116AA Academy dual-control one-taphole bidet mixer with pop-up waste

- - Ideal Standard E0166AA Academy pair basin taps

- - Ideal Standard E0206AA Academy dual-control one-taphole sink mixer

- - Ideal Standard E0625AA Waterways Q/T dual-control one-taphole basin mixer with swivel spout and pop-up waste

- - Ideal Standard E0655AA Waterways Q/T pair basin taps

- - Ideal Standard E0675AA Waterways Q/T dual-control basin mixer with fixed spout and pop-up waste

- - Ideal Standard E0685AA Waterways Q/T dual-control basin filler

- - Ideal Standard E0695AA Waterways Q/T dual-control bidet mixer with pop-up waste

- - Sottini E1952AA Alchemy dual-control basin mixer with crosshead handles

- - Sottini E1953AA Alchemy dual-control basin mixer with lever handles

- - Sottini E1961AA Alchemy dual-control wall basin mixer with lever handles

- - Sottini E1962AA Alchemy dual-control wall basin mixer with crosshead handles

- - Ideal Standard E6043AA Ardenne dual-control one-taphole sink mixer

- - Ideal Standard E6135AA Affinity dual-control one-taphole sink mixer with crosshead handles

- - Ideal Standard E6136AA Affinity dual-control one-taphole sink mixer with lever handles

- - Ideal Standard E7834AA Affinity dual-control two-taphole bridge sink mixer with lever handles

- - Sottini N9668AA Reprise three-taphole basin mixer - post-2001 versions

- - Sottini N9669AA Reprise three-taphole bidet mixer - post-2001 versions

- - Armitage Shanks S7091AA Sandringham bath pillar taps with acrylic handles

- - Armitage Shanks S7092AA Sandringham bath pillar taps

- - Armitage Shanks S7106AA Nuastyle pair basin taps with anti-vandal indices

- - Armitage Shanks S7107AA Nuastyle pair bath taps with anti-vandal indices

- - Armitage Shanks S7346AA Accolade Q/T dual-control one-taphole basin mixer with pop-up waste

- - Armitage Shanks S7694AA Sandringham bath shower mixer

- - Armitage Shanks S7706AA Sandringham bath shower mixer

- - Armitage Shanks S7934AA Sandringham sink mixer

Before Ordering

Some Tantadisc installations use a shorter 52mm to 53mm cartridge family rather than this 56.7mm cartridge, so E1515AA and E1735AA should not be identified by model code alone. Reprise installations also differ by production period, with E960582NU applying to the verified post-2001 cartridge arrangement.

Not sure this is the right cartridge? Use the Di Vapor Part Identification service and send us a photo of your old part.

Related Spares You May Need

- - TACSIL 3g Premium Cartridge Silicone Grease - WRAS Approved - suitable for lubricating cartridge seals and O-rings during installation

- - Ideal Standard S960025NU Ceramic Disc Flow Cartridges Pack of 2 - contains one E960582NU anti-clockwise-close cartridge and one E960583NU clockwise-close cartridge

- - Ideal Standard E960583NU 1/2 Inch Ceramic Disc Flow Cartridge - corresponding clockwise-close cartridge

- - Ideal Standard A954360NU11 1/2 Inch Flow Cartridge - shorter 52mm to 53mm clockwise-close cartridge family; do not substitute it for E960582NU based on thread size alone

- - Ideal Standard A922539NU11 Dekora Cartridge to Handle Adapter

FAST DELIVERY

• Delivery of this item is priced as a 'small packet'. UK delivery costs £5.95 incl. VAT.
• For all in-stock spare parts the typical UK delivery timescale is 2-5 working days.
• If you need a part urgently then we can provide a next-day (delivered Mon-Fri) UK delivery service for all in-stock small parcels ordered before 3.00pm, Monday - Friday.
• Next day delivery is available to select at an additional charge during the checkout.
• We delivery WORLDWIDE. For more information about international deliveries, read our delivery page.

RETURNS

• If you need to return a part then please telephone Di Vapor on 0121 705 0866 with the reasons for the return within 14 days of receiving the goods.
• For more information please see our terms and conditions.