Hansgrohe 95730000 Cartridge
SUMMARY
Hansgrohe 95730000 35mm Eco Ceramic Lever Cartridge for Single-Lever Mixers
Hansgrohe 95730000 is a 35 mm ceramic Eco lever cartridge used to control water flow and the hot and cold water blend in selected Hansgrohe single-lever shower, bath, bidet and kitchen mixers.
The Eco cartridge is fitted to selected mixer variants with two flow rates. A worn, scaled or damaged cartridge can cause stiff lever movement, poor flow or temperature control, or water dripping from the shower head or spout when the mixer is turned off.
Technical Details
- - Manufacturer product code: 95730000.
- - Manufacturer designation: HG cartridge Eco.
- - Cartridge type: ceramic single-lever mixer cartridge.
- - Nominal cartridge diameter: 35 mm.
- - Function: controls water flow and the hot and cold water blend.
- - EAN: 4011097659176.
- - No superseded product code has been confirmed for 95730000.
- - Do not identify this cartridge by its 35 mm diameter alone because other Hansgrohe cartridge versions have the same nominal diameter.
- - Check the complete mixer product code and production date before ordering.
Confirmed Compatible Models
- - Hansgrohe Focus single-lever manual shower mixer for exposed installation with 2 flow rates 31968000 - production from 02/2010.
- - Hansgrohe Focus single-lever bath and shower mixer Monotrou with 2 flow rates 31938000 - production from 05/2021. The manufacturer also lists production periods 05/2020 to 04/2021, 09/2011 to 04/2020 and 02/2010 to 08/2011.
- - Hansgrohe Logis single-lever bath and shower mixer Monotrou with 2 flow rates 71315000 - production from 01/2015. The manufacturer also lists production from 05/2020 and 04/2014 to 04/2020.
- - Hansgrohe Focus single-lever bidet mixer with 2 flow rates and pop-up waste 31928000 - production from 03/2017, 08/2012 to 02/2017 and 02/2010 to 07/2012.
- - Hansgrohe Logis single-lever manual bath mixer for exposed installation with 2 flow rates 71401000 - production from 07/2014 and 04/2014 to 06/2014.
- - Hansgrohe Logis single-lever manual shower mixer for exposed installation with 2 flow rates 71601000 - production from 04/2014.
- - Hansgrohe Focus M42 single-lever kitchen mixer 120 CoolStart EcoSelection single spray mode 71805000 - production from 10/2018.
- - Hansgrohe Focus M42 single-lever kitchen mixer 100 CoolStart EcoSelection single spray mode 71809000 - production from 10/2018.
- - Hansgrohe Rebris S single-lever bath mixer for exposed installation with 2 flow rates 72443000 - Chrome - production from 06/2022.
- - Hansgrohe Rebris S single-lever shower mixer for exposed installation with 2 flow rates 72643670 - Matt Black - production from 06/2022.
Additional Manufacturer Diagram Fitment
- - Hansgrohe MySport M single-lever kitchen mixer 13841000.
- - Hansgrohe MySport L single-lever kitchen mixer 13831000.
- - Hansgrohe MySport L single-lever kitchen mixer 1jet 13862003.
- - Hansgrohe Cento XL single-lever kitchen mixer 2jet 14784000.
- - Hansgrohe Cento XXL single-lever kitchen mixer 14811000.
- - Hansgrohe Ecos L single-lever kitchen mixer 14816009.
- - Hansgrohe Ecos M single-lever kitchen mixer 14815009.
- - Hansgrohe Cento L single-lever kitchen mixer 14787000.
- - Hansgrohe regional mixer model 31539000.
- - Hansgrohe regional mixer model 31539004.
Installation and Troubleshooting
- - Symptom: water drips from the shower head or spout when the mixer is closed. Likely cause: worn cartridge sealing surfaces or debris inside the cartridge. Solution: confirm the mixer code and production date before replacing the cartridge.
- - Symptom: the control lever is stiff or difficult to move. Likely cause: limescale, debris or cartridge wear. Solution: inspect the cartridge and valve body and replace the cartridge where required.
- - Symptom: the maximum hot-water temperature is too low. Likely cause: the mixer hot-water limiter may require adjustment rather than cartridge replacement. Solution: check the mixer-specific servicing instructions.
- - Isolate the hot and cold water supplies before dismantling the mixer.
- - Apply suitable silicone grease sparingly to cartridge O-rings and seals during installation.
- - Retaining components and tightening requirements differ between mixer bodies, so follow the instructions for the exact mixer rather than applying a universal torque value.
Related Spares You May Need
Related components vary by mixer model and production period. Check the relevant spare-parts diagram before ordering because not every item below is used in every mixer fitted with cartridge 95730000.
- - TACSIL 3g Premium Cartridge Silicone Grease - WRAS Approved.
- - Hansgrohe 96338000 Rubber Screw Cover Cap - Grey.
- - Hansgrohe 97981000 Diverter Knob for Talis Classic Valve.
- - Hansgrohe 97980000 Non Return Check Valve NRV - Pair.
- - Hansgrohe 98133000 16x2mm O-Ring.
- - Hansgrohe 98750000 Cartridge Adapter.
- - Hansgrohe 95049000 Fixing Set.
- - Hansgrohe 92646000 Seal Kit.
- - Hansgrohe 98189000 O-Ring.
FAST DELIVERY
- Delivery of this item is priced as a 'small packet'. UK delivery costs £5.95 incl. VAT.
- For all in-stock spare parts the typical UK delivery timescale is 2-5 working days.
- If you need a part urgently then we can provide a next-day (delivered Mon-Fri) UK delivery service for all in-stock small parcels ordered before 3.00pm, Monday - Friday.
- Next day delivery is available to select at an additional charge during the checkout.
- We delivery WORLDWIDE. For more information about international deliveries, read our delivery page.
RETURNS
- If you need to return a part then please telephone Di Vapor on 0121 705 0866 with the reasons for the return within 14 days of receiving the goods.
- For more information please see our terms and conditions.
Payment Methods
Di Vapor accepts the following payments methods:
- Visa
- Mastercard
- Paypal
- Maestro
- Discover
- JCB, Diners Club, EnRoute
- American Express (via PayPal guest checkout only)
- Cheque (must be cleared before dispatch)
- BACS
SECURITY
Di Vapor treats your privacy and security with the utmost importance. The payment systems used by Di Vapor are based on industry standards to ensure all payments are securely handled. In fact, we ensure the Di Vapor website is regularly checked to guarantee compliance to PCI security standards.
