Ideal Standard S8739NU Brass Version
Send a photo of your item and we'll help confirm it.
Summary
Ideal Standard S8739NU Brass Version.
Sold as a pair. Includes:
1 x Anti-Clockwise turn to open
1 x Clockwise turn to open
Ideal Standard S8739NU11 is the brass version pair of 1/4 turn ceramic disc tap flow cartridges used for hot and cold tap control. The pair includes one anti-clockwise turn to open cartridge and one clockwise turn to open cartridge.
These cartridges control water flow on the tap body by opening and closing the ceramic disc assembly through the tap handle. This pair is for taps and should not be ordered as the hot and cold cartridge set for Trevi shower valves.
Technical Details
| Part Number | S8739NU11 |
|---|---|
| Pack contents | 1 x anti-clockwise turn to open cartridge and 1 x clockwise turn to open cartridge |
| Cartridge type | M24 DX 1/4 turn ceramic disc flow cartridge pair |
| Total height from top screw to base | 45.5mm |
| Total height excluding screw | 43mm |
| Bottom O-ring diameter | 23.9mm |
| Thread diameter | 24.8mm |
| Toothed spline diameter | 9.3mm |
| Number of spline teeth | 40 to 44 depending on the vertical cut pattern |
| Number of O-rings per cartridge | 2 |
Before You Order
Check the cartridge height, thread diameter, spline diameter, number of spline teeth and turning direction against the removed cartridges before ordering. The brass version is supplied as a hot and cold pair, so make sure both cartridges are required rather than a single hot or cold side only.
Confirmed Tap Models
- Ideal Standard A7640AA Domi Duo Dual Control One Taphole Bath Filler Spare Parts
- Sottini E7611AA Icarus Dual Control 1 Taphole Basin Filler with Pop-Up Waste Spare Parts
- Ideal Standard A7610AA Domi Duo Dual Control Monobloc Tap Spare Parts
Related Spares You May Need
- Ideal Standard S8739NU Pair of Hot and Cold Flow Cartridges (On/Off Cartridge)
- Ideal Standard A952500NU11 Basin Tap 1/2 Dx 1/4 Turn Flow Cartridge Clockwise Close
- Trevi A952501NU11 Ideal Standard 1/2 Dx 1/4 Turn Flow Cartridge Anti Clockwise Close
- TACSIL 3g Premium Cartridge Silicone Grease - WRAS Approved
- Ideal Standard A953090 Domi-Duo Handle Carrier Spline Adapter
- Trevi A91831914 Screw M4 taper shoulder slotted (Ideal Standard)
- A961667NU Ideal Standard / Trevi Ceramix O'Ring Pair for Cartridge (28.3mm x 1.78mm)
- Ideal Standard A963165AA Domi Pair Indices for Metal Handle Basin Taps
- Ideal Standard A961302NU (A911680) CENTRAL SEALING GASKET AD=42.5
- Ideal Standard A962974AA W/WAYS DF BAS MXR A/SPLASH CHROME
- Ideal Standard E960517NU PAIR OF M12 INLET TAILS COMPLETE
- Ideal Standard E960540NU W/WAYS BAS/BID PUW ROD ST.ST
- Ideal Standard A962989AA POP-UP ROD CHROME 760/762
Fast delivery
- UK delivery: £5.95 incl. VAT for this small packet item.
- For all in-stock spare parts the typical UK delivery timescale is 2-5 working days.
- If you need a part urgently then we can provide a next-day (delivered Mon-Fri) UK delivery service for all in-stock small parcels ordered before 3.00pm, Monday - Friday.
- Next day delivery is available to select at an additional charge during the checkout.
- Worldwide delivery available — see our delivery page for details.
Returns
- 14 days 'risk-free' returns.
- Start a return within 14 days of receiving your order by calling 0121 705 0866 or using our contact page.
- Full returns information is available in our terms and conditions.
Payment methods
We accept the following payment methods:
- Card payments: Visa, Mastercard, Maestro, Discover, JCB, Diners Club and EnRoute
- PayPal
- American Express: available via PayPal guest checkout only
- BACS bank transfer
- Cheque: dispatch takes place once payment has cleared
Security
We use industry-standard payment systems to help keep your payment information secure. Our website and payment processes are regularly checked to maintain PCI security standards.
- Secure SSL encryption
- Your personal and payment details are protected
- Regularly checked for PCI security standards
