Grohe 47080000 Pressure Balance Cartridge for Grohsafe and Grohmaster Valves - Compatible Replacement

SUMMARY

Grohe 47080000 Pressure Balance Cartridge for Grohsafe and Grohmaster Valves (47 080 000 / 47.080.000) - Compatible Replacement

Grohe 47080000 pressure balance valve cartridge compatible replacement for selected legacy Grohsafe and Grohmaster shower valves. Also referenced as 47 080 000 and 47.080.000, this cartridge controls the pressure-balancing function inside the valve and is supplied as a replacement cartridge assembly.

The pressure-balancing mechanism responds to changes in the hot and cold water supplies to help maintain stable mixed-water conditions. On the verified legacy valve systems, the mechanism is designed to shut down the mixed flow if one supply suffers a complete loss of pressure.

Technical Details

- - GROHE article code: 47080000

- - Code variants: 47 080 000 and 47.080.000

- - Part type: pressure balance valve cartridge

- - Replacement type: compatible replacement

- - Total length: 85mm

- - Height at seal: 46.5mm

- - Diameter at widest point at seal: 45.6mm

- - Top spline diameter: 7.6mm

- - Top spline: 20 teeth / notches, with a flattened section meaning not all splines are visible around the spindle

Confirmed Compatible Models

- - Grohe 35 235 / 35235000 Grohsafe Recessed Shower Valve

- - Grohe 35 236 / 35236000 Grohmaster Grohsafe BIV Shower

- - Grohe 35 237 / 35237000 Grohsafe Exposed Pressure Balanced Shower Valve

- - GROHE PBV 35210 series

Before Ordering

- - Check the cartridge code, overall dimensions and spline against the removed cartridge before ordering

- - Do not identify this cartridge by dimensions alone, as different Grohsafe and Grohmaster valve generations use different cartridge designs

- - This cartridge should not be assumed to fit every GROHE Grohsafe or Grohmaster shower valve

Installation Note

Apply suitable silicone grease to the cartridge O-rings and seals during installation to reduce friction and help the cartridge seat correctly. On the verified legacy valves, the normal supply arrangement is hot on the left and cold on the right. The cartridge can be rotated through 180 degrees where the supplies are reversed, and its locating points must be correctly seated during reassembly.

Troubleshooting

- - Symptom: water continues to drip from the shower head after the valve is turned off - Likely Cause: cartridge inlet O-ring sealing problem or stop-ring adjustment leaving the cartridge slightly open - Solution: inspect the cartridge seals and stop-ring adjustment and replace worn or damaged components as required

- - Symptom: no hot or cold water flow - Likely Cause: debris or restriction at the corresponding valve inlet - Solution: inspect and clean the relevant inlet before replacing components unnecessarily

Related Spares You May Need

- - TACSIL 3g Premium Cartridge Silicone Grease - WRAS Approved

- - Grohe 45443000 Diverter Cartridge for Grohsafe Recessed Shower

- - Grohe 08565000 Non-Return Valve for Europlus Valve

FAST DELIVERY

• Delivery of this item is priced as a 'small packet'. UK delivery costs £5.95 incl. VAT.
• For all in-stock spare parts the typical UK delivery timescale is 2-5 working days.
• If you need a part urgently then we can provide a next-day (delivered Mon-Fri) UK delivery service for all in-stock small parcels ordered before 3.00pm, Monday - Friday.
• Next day delivery is available to select at an additional charge during the checkout.
• We delivery WORLDWIDE. For more information about international deliveries, read our delivery page.

RETURNS

• If you need to return a part then please telephone Di Vapor on 0121 705 0866 with the reasons for the return within 14 days of receiving the goods.
• For more information please see our terms and conditions.