Hansgrohe 93760000 MonoblockTallis Kitchen Tap Cartridge

SUMMARY

Hansgrohe 93760000 Ceramic Cartridge M25LXS for Single Lever Mixers

The Hansgrohe 93760000 M25LXS is a complete ceramic single-lever mixing cartridge assembly used inside selected Hansgrohe and AXOR kitchen mixers, basin mixers, bidet mixers and concealed wall-mounted basin mixers. The cartridge operates beneath the mixer handle and controls the on/off function, water flow and the blend of hot and cold water.

A worn or damaged cartridge can cause water to drip from the spout when the mixer is turned off, stiff or erratic lever movement, reduced flow control or difficulty obtaining the required water temperature. Confirm the exact mixer article number and construction period before ordering because visually similar Hansgrohe cartridges are not necessarily interchangeable.

Technical Details

- - Hansgrohe part code: 93760000

- - Manufacturer cartridge designation: M25LXS

- - Part type: complete ceramic single-lever mixing cartridge assembly

- - Function: on/off operation, flow regulation and hot-to-cold water mixing

- - Application: selected deck-mounted and concealed wall-mounted Hansgrohe and AXOR kitchen, basin and bidet mixers

- - GTIN/EAN: 4059625297810

- - Installation position: beneath the mixer handle and cartridge-retaining components

- - No separate left-hand or right-hand version was identified

- - No verified superseded or replacement code was identified

Important Cartridge Identification

93760000 is the Hansgrohe M25LXS cartridge. It is a separate assembly from the Hansgrohe 93740000 M25XS cartridge and the Hansgrohe 93818000 M25LAXS cartridge. Do not select the cartridge from its apparent diameter or appearance alone.

Before You Order

Check the complete mixer article number, finish suffix and construction date against the applicable spare-parts diagram. Talis M54 mixers do not all use the same cartridge, and older Talis M54 210 pull-out variants can use 93740000 instead of 93760000. Cartridge adapters, seals, retaining components and fixing sets are separate parts and should not be assumed to be included.

Confirmed Compatible Models

- - Hansgrohe 72804000 Talis M54 Single Lever Kitchen Mixer 220 1Jet - production after April 2021

- - Hansgrohe 72804800 Talis M54 Single Lever Kitchen Mixer 220 1Jet - production December 2019 to March 2021

- - Hansgrohe 72806000 Talis M54 Single Lever Kitchen Mixer U 220 1Jet - production after April 2021

- - Hansgrohe 72840670 Talis M54 Single Lever Kitchen Mixer 270 1Jet - production after April 2020

- - Hansgrohe 72844000 Talis M54 Single Lever Kitchen Mixer U 220 Eco 1Jet - production after December 2019

- - AXOR One 48001000 Single Lever Basin Mixer 70 with Lever Handle and Waste Set - production after April 2021

- - AXOR One 48001001 Single Lever Basin Mixer 70 with Lever Handle without Waste Set - production after August 2021

- - AXOR One 48002671 Single Lever Basin Mixer 260 for Wash Bowls without Waste Set - production after August 2021

- - AXOR One 48120000 Concealed Wall-Mounted Single Lever Basin Mixer with 220mm Spout - production after June 2021

- - AXOR One 48120007 Concealed Wall-Mounted Single Lever Basin Mixer with 220mm Spout - production after April 2021

- - AXOR One 48120670 Concealed Wall-Mounted Single Lever Basin Mixer with 220mm Spout - production after June 2022

- - Hansgrohe 76063670 Finoris Single Lever Basin Mixer 230 with Pull-Out Spray 2Jet and Push-Open Waste Set - production after June 2021

- - Hansgrohe 76200000 Finoris Single Lever Bidet Mixer with Push-Open Waste Set - production after June 2021

- - Hansgrohe 75050000 Vivenis Concealed Wall-Mounted Single Lever Basin Mixer with 19.2cm Spout - production after June 2021

- - Hansgrohe 75050670 Vivenis Concealed Wall-Mounted Single Lever Basin Mixer with 19.2cm Spout - production after June 2021

- - Hansgrohe 75030670 Vivenis Single Lever Basin Mixer 210 with Swivel Spout and Pop-Up Waste Set - production after June 2021

Additional Manufacturer-Listed Article Families

Hansgrohe uses XX and XXX within the following article numbers as finish-code placeholders. The complete article number and construction period must be checked before ordering.

- - Hansgrohe Talis M54 220 1jet 72804XX7

- - Hansgrohe Talis M54 U 220 1jet 72806XX7

- - Hansgrohe Talis M54 270 1jet 72840XX7

- - Hansgrohe Talis M54 U 220 Eco 1jet 72844XXX

- - Hansgrohe Talis N 220 U-Style 1Jet 72806XX1

- - Hansgrohe Talis N 220 U-Style 1Jet 72858XX1

- - AXOR One 70 basin mixer 48000XX7

- - AXOR One 260 basin mixer 48002XX7

- - AXOR One wall-mounted basin mixer 220 48120XX7

- - AXOR One wall-mounted basin mixer 160 48170XX7

- - AXOR One bidet mixer 48210 series

- - Hansgrohe Finoris 100 basin mixer 76010XX1

- - Hansgrohe Finoris 110 basin mixer 76020XX1

- - Hansgrohe Finoris 260 basin mixer 76070XX1

- - Hansgrohe Finoris wall-mounted basin mixer 225 76050XX1

- - Hansgrohe Finoris wall-mounted basin mixer 225 76050XX7

- - Hansgrohe Finoris 230 2jet basin mixer 76063XX3

- - Hansgrohe Finoris 230 2jet basin mixer 76063XX9

- - Hansgrohe Tecturis E wall-mounted basin mixer 225 73051XX7

- - Hansgrohe Tecturis E wall-mounted basin mixer 225 73051823

- - Hansgrohe Tecturis E wall-mounted basin mixer 225 73051XX9

- - Hansgrohe Tecturis S wall-mounted basin mixer 165 73350XX7

- - Hansgrohe Tecturis S wall-mounted basin mixer 225 73351XX3

- - Hansgrohe Tecturis S wall-mounted basin mixer 225 73351XX9

- - Hansgrohe Zesis S wall-mounted basin mixer 195 74750XX3

- - Hansgrohe Zesis S wall-mounted basin mixer 195 74750XX7

- - Hansgrohe Zesis S 230 CoolStart basin mixer 74731XX3

- - Hansgrohe Zesis S 230 CoolStart basin mixer 74731XX9

Related Spares You May Need

- - Hansgrohe 98189000 14x2.5mm O-Ring - cartridge-area seal used in applicable Talis M54 mixer assemblies

- - Hansgrohe 95049000 34mm Shaft Fixing Set - mounting set used beneath applicable deck-mounted mixers

- - Hansgrohe 98866000 Cartridge Adapter - adapter used beneath 93760000 in selected deck-mounted mixer constructions

- - Hansgrohe 95634000 Cartridge Adapter - adapter used with 93760000 in selected concealed wall-mounted mixer constructions

- - Hansgrohe 98128000 13x2mm O-Ring - seal used with 95634000 in applicable concealed mixer assemblies

Installation Note

Isolate the hot and cold water supplies before dismantling the mixer. Clean the cartridge seating area and inspect the associated seals and adapter for wear or damage before reassembly. Use the installation or service instructions for the exact mixer because the adapter arrangement and retaining components vary between deck-mounted and concealed models.

FAST DELIVERY

• Delivery of this item is priced as a 'small packet'. UK delivery costs £5.95 incl. VAT.
• For all in-stock spare parts the typical UK delivery timescale is 2-5 working days.
• If you need a part urgently then we can provide a next-day (delivered Mon-Fri) UK delivery service for all in-stock small parcels ordered before 3.00pm, Monday - Friday.
• Next day delivery is available to select at an additional charge during the checkout.
• We delivery WORLDWIDE. For more information about international deliveries, read our delivery page.

RETURNS

• If you need to return a part then please telephone Di Vapor on 0121 705 0866 with the reasons for the return within 14 days of receiving the goods.
• For more information please see our terms and conditions.