Crosswater AQ2135 1/2 Inch Hot Ceramic Disc Headwork for Mike Mono Basin Taps - Compatible Spare
This 1/2 inch hot ceramic disc headwork is a compatible spare for Crosswater Mike mono basin taps that use the AQ2135 cartridge. It is supplied under Part Number CR-AQ2135.
The headwork controls the hot water flow and shut-off through the tap. Its splined spindle provides the handle connection, allowing the handle to operate the internal ceramic disc mechanism.
Technical Details
- - Part reference: AQ2135
- - Part Number: CR-AQ2135
- - Part type: Ceramic disc tap headwork
- - Position: Hot side
- - Nominal size: 1/2 inch
- - Fitting: Threaded screw-in headwork
- - Handle connection: Splined spindle
Check Before Ordering
Confirm that your tap uses the AQ2135 hot headwork and compare your existing part with the product photographs. Check the threaded body, spindle and handle connection carefully. The Mike range name and nominal size alone do not confirm fitment.
Dripping Tap and Fitting Advice
Water dripping from the spout when the tap is turned off can indicate debris between the ceramic discs or a problem with the headwork seating. Identify which side is causing the leak and inspect the seating area before fitting a new cartridge.
Isolate the water supplies and drain the tap before removing the headwork. Keep the seating area clean and apply a small amount of suitable silicone grease to the O-rings during fitting. Reassemble the tap and check for leaks and correct shut-off.
Related Spares You May Need
- - TACSIL 3g WRAS Approved Silicone Grease - TAC86 for lubricating cartridge O-rings and seals during fitting
- - Crosswater AQ3930 1/2 Inch Ceramic Disc Headwork - CR-AQ3930 for the cold-water control on Mike mono basin taps that use the AQ3930 reference
If you are unsure which part you need, use our part identification service.
Di Vapor accepts the following payments methods:
Di Vapor treats your privacy and security with the utmost importance. The payment systems used by Di Vapor are based on industry standards to ensure all payments are securely handled. In fact, we ensure the Di Vapor website is regularly checked to guarantee compliance to PCI security standards.