CL1/2K-90T-20-C is a clockwise open flow cartridge for controlling water flow in a shower valve or tap body that uses this 1/2 inch BSP ceramic disc headwork format.
This cartridge opens in the clockwise direction and should be checked against the removed cartridge before ordering, especially the thread size, spline/stem arrangement, overall shape and opening direction. A common symptom of flow cartridge failure is water passing or dripping from the shower head or spout when the valve or tap is turned off.
Technical Details
- - Part number: CL1/2K-90T-20-C
- - Base model: CL1/2K-90T-20
- - Operation: clockwise open
- - Cartridge type: quarter-turn ceramic disc headwork assembly
- - Thread size: 1/2 inch BSP male
- - Body material: brass
- - Seals: NBR O-rings and silicone gaskets
- - Maximum working pressure: 10 Bar
- - Maximum operating temperature: 85°C
- - WRAS approval for base model CL1/2K-90T-20: 251012001
Installation Note
- - Isolate the water supply before removing the old cartridge.
- - Match the new cartridge to the removed part before fitting.
- - Apply suitable silicone grease to the O-ring and bottom seal during installation.
- - Do not force the cartridge into the valve body if the thread, seal position or opening direction does not match.
Related Spares You May Need
- - TACSIL 3g Premium Cartridge Silicone Grease - WRAS Approved
Di Vapor accepts the following payments methods:
Di Vapor treats your privacy and security with the utmost importance. The payment systems used by Di Vapor are based on industry standards to ensure all payments are securely handled. In fact, we ensure the Di Vapor website is regularly checked to guarantee compliance to PCI security standards.