Beaumont Si301 Pair of Hot & Cold Heads and Valves - Chrome (Ultra)

SUMMARY

Beaumont Si301 Pair of Hot & Cold Heads and Valves - Chrome (Ultra). If you just want to replace the cartridges, the code of the cartridge used in this assembly is Ultra PR222 (link at the bottom of this page).

The Beaumont Si301 is a chrome pair of hot and cold head and valve assemblies for selected Ultra Beaumont tap and bath shower mixer products. The set replaces the visible tap head and valve assembly where the installed Beaumont Si301 assembly matches the original part.

The valve assemblies control water flow and shut-off on the hot and cold sides. If only the internal cartridges are required, the cartridge used in this Si301 assembly is Ultra PR222.

Technical Details

- - Part Number: Si301

- - Supplied as a pair for hot and cold sides

- - Finish: chrome

- - Associated cartridge code: PR222

- - Diameter of thread: 20mm

- - Diameter of bottom washer: 18mm

- - Total height excluding rivet at bottom: 92mm

- - Associated assembly type: pair of 1/2 inch BSP threaded valves

Before You Order

- - Check the installed head and valve assembly against the original Beaumont Si301 part before ordering.

- - Check the 20mm thread diameter, 18mm bottom washer diameter and 92mm total height excluding the bottom rivet against the removed part.

- - For I303X, check that the tap is the later SI301 version from 2015 onwards and not the earlier SI302 version.

Common Fault Symptoms

- - Symptom: water continues to drip from the spout or shower outlet when the tap is turned off.

- - Likely cause: worn hot or cold headwork or worn PR222 cartridges inside the Si301 assembly.

- - Solution: replace the matching Si301 head and valve assemblies or replace the PR222 cartridges only if the visible heads and shrouds are still serviceable.

Confirmed Compatible Models

- - Hudson Reed / Nuie I307X Beaumont 3 Tap Hole Basin Mixer with Pop Up Waste Tap Spare Parts

- - Hudson Reed / Ultra I321XE Beaumont Basin Taps Spare Parts

- - Hudson Reed / Nuie I304X Beaumont 1/2 Bath Shower Mixer with Shower Kit Spare Parts

- - Ultra Luxury Beaumont Mono Bidet Mixer with Pop Up Waste Chrome I306X Spare Parts

- - Hudson Reed / Nuie I328X Beaumont Bath Filler Spare Parts

- - Hudson Reed / Ultra I354X Beaumont 3/4 Bath Shower Mixer with Shower Kit Spare Parts

- - Hudson Reed / Nuie I303X Beaumont Luxury 3/4 Cranked Bath Shower Mixer Spare Parts - 2015 onwards SI301 version only

Related Spares You May Need

- - PR222 Ultra Flow Cartridges (Pair) - Compression Cartridge

- - TACSIL 3g Premium Cartridge Silicone Grease - WRAS Approved

- - Ultra Si303 Beaumont 3/4" 1010 Head & Valve (Sl303) (5/8" BSP)

- - Ultra Si302 Beaumont 3/4 5412 Head & Valve (Sl302)

- - Beaumont Pair of 1/2 Inch Basin Tap Valve Cartridges (used in Si301)

- - Beaumont Si301 Alternative Replacement Shroud for Basin Taps (Slim Version) - Pair

- - Premier Bathrooms Beaumont Brassware IR09B Hot & Cold Indices (Ultra Finishing)

FAST DELIVERY

• Delivery of this item is priced as a 'small packet'. UK delivery costs £5.95 incl. VAT.
• For all in-stock spare parts the typical UK delivery timescale is 2-5 working days.
• If you need a part urgently then we can provide a next-day (delivered Mon-Fri) UK delivery service for all in-stock small parcels ordered before 3.00pm, Monday - Friday.
• Next day delivery is available to select at an additional charge during the checkout.
• We delivery WORLDWIDE. For more information about international deliveries, read our delivery page.

RETURNS

• If you need to return a part then please telephone Di Vapor on 0121 705 0866 with the reasons for the return within 14 days of receiving the goods.
• For more information please see our terms and conditions.