Beaumont Pair of 1/​2 Inch Basin Tap Valve Cartridges (used in Si301)

SUMMARY

This pair of Beaumont SI301VLX 1/2 inch basin tap valve cartridges is used in Si301 tap assemblies and is supplied for the hot and cold sides of the tap.

These valve cartridges control water flow and shut-off. When the original valves are worn, common symptoms can include dripping from the spout, stiffness when turning the tap heads, or poor shut-off.

Technical Details

- - Part Number: SI301VLX

- - Supplied as a pair for hot and cold sides

- - Used in Si301 tap assemblies

- - The associated Si301 heads and valves assembly is listed as a pair of 1/2 inch BSP threaded valves

- - Associated Si301 heads and valves assembly dimensions are 20mm thread diameter, 18mm bottom washer diameter, and 92mm overall height excluding the rivet at the bottom

Before you order check

- - Check that your tap uses the Si301 heads and valves assembly

- - Check the overall valve assembly size and thread details against your original parts before ordering

- - If ordering for I303X, check that your tap is the later SI301 version from 2015 onwards and not the earlier SI302 version

Confirmed Compatible Models

- - Hudson Reed / Nuie I307X Beaumont 3 Tap Hole Basin Mixer with Pop Up Waste Tap Spare Parts

- - Hudson Reed / Ultra I321XE Beaumont Basin Taps Spare Parts

- - Hudson Reed / Nuie I304X Beaumont 1/2 Bath Shower Mixer with Shower Kit Spare Parts

- - Ultra Luxury Beaumont Mono Bidet Mixer with Pop Up Waste (Chrome) - I306X Spare Parts

- - Hudson Reed / Nuie I328X Beaumont Bath Filler Spare Parts

- - Hudson Reed / Ultra I354X Beaumont 3/4 Bath Shower Mixer with Shower Kit Spare Parts

- - Hudson Reed / Nuie I303X Beaumont Luxury 3/4 Cranked Bath Shower Mixer Spare Parts - 2015 onwards SI301 version

Related Spares You May Need

- - Beaumont Si301 Pair of Hot & Cold Heads and Valves - Chrome (Ultra)

- - Beaumont Si301 Alternative Replacement Shroud for Basin Taps (Slim Version) - Pair

- - Premier Bathrooms Beaumont Brassware IR09B Hot & Cold Indices (Ultra Finishing)

- - TACSIL 3g Premium Cartridge Silicone Grease - WRAS Approved

Troubleshooting

- - Symptom: water continues to drip from the spout when the tap is turned off

- - Likely cause: worn valve cartridges in the hot or cold side

- - Solution: replace the pair of valve cartridges and apply a small amount of silicone grease to suitable seals during installation

FAST DELIVERY

• Delivery of this item is priced as a 'small packet'. UK delivery costs £5.95 incl. VAT.
• For all in-stock spare parts the typical UK delivery timescale is 2-5 working days.
• If you need a part urgently then we can provide a next-day (delivered Mon-Fri) UK delivery service for all in-stock small parcels ordered before 3.00pm, Monday - Friday.
• Next day delivery is available to select at an additional charge during the checkout.
• We delivery WORLDWIDE. For more information about international deliveries, read our delivery page.

RETURNS

• If you need to return a part then please telephone Di Vapor on 0121 705 0866 with the reasons for the return within 14 days of receiving the goods.
• For more information please see our terms and conditions.