Bathstore 90000015250 Spare Bensham bidet hot cartridge - Nov 2015 onward
Cartridge Measurements:
| Total Length (including bottom seal) | 72mm |
|---|---|
| Diameter at Widest Point | 23.9mm |
| Top Spline Diameter | 8mm |
| Top Spline Teeth / Notches | 30 |
| Barrel Diameter | 18.4mm |
| Lower Thread | 1/2" BSP |
| Bottom Seal Colour | Red (for Hot Side) |
| Close Direction | Anti-Clockwise Close (Clockwise Open) |
| Upper Thread (closer to spline) | 21.8mm |
| Used in | BS 41500080000 |
Question: Does the Bathstore 90000015250 control the Benshan Bidet Tap’s water temperature?
Answer: No, this Bathstore spare part is an on/off cartridge which controls the amount of water flow.
Question: What is the cold cartridge for the Bathstore Bensham Bidet Tap?
Answer: Spare part number 90000015240 is the cold cartridge for the Bensham Bidet. Please visit the page for a tap cartridge buying guide.
Question: Do I have to replace the hot and cold cartridge?
Answer: It might be best to replace the Bathstore 90000015250 together with the cold cartridge because when one cartridge has worn out the other might be wearing out as well.
Question: The handle has been difficult to turn. Does it have something to do with the Bathstore 90000015250 Bensham Bidet cartridge?
Answer: Tap handles that become stiff to turn is the result of mineral deposits between the handle and the Bathstore 90000015250 cartridge.
The minerals can harden faster especially where hot water moves through. Delaying the cartridge replacement might lead to it being stuck in the tap seat. This will make it impossible to replace and will require replacing the whole bidet tap unit.
Question: Can I use the Bathstore 90000015250 on the cold side of the Bensham Bidet Tap?
Answer: No, the open and close direction of the hot and cold cartridges go opposite of each other. The 90000015250 Bathstore hot cartridge opens clockwise while the cold cartridge opens anti-clockwise.
Question: I want to know if the Bathstore cartridge is compatible with the bidet tap I have. Can you help me?
Answer: Yes, we can and will gladly help you with your spares needs.
+ You can message us or chat with us via WhatsApp (contact number: 07754 173340). Di Vapor has super helpful and friendly spares experts who will personally respond to your messages.
Question: Explain to me the importance of greasing the Bathstore 90000015250 cartridge.
Answer: Lubricating or greasing the O-ring of the 90000015250 Bathstore Bensham Bidet Tap replacement cartridge will help the new part squeeze in the tap seat properly. At the same time, it can protect the seal from deteriorating faster than intended.
However, only silicone-based grease must be used. Other lubricant types can negatively affect the O-ring. Please scroll down to the last section to see the plumbing grease we supply. The grease is not only silicone-based but also heat resistant.
We provide many Bathstore spares which are in stock and ready to ship.
+ Bathstore Thermostatic Cartridges
Same day dispatched for all spares purchased before 3 PM (M-F).
We accept the following payment methods:
We use industry-standard payment systems to help keep your payment information secure. Our website and payment processes are regularly checked to maintain PCI security standards.