A961087NU Ideal Standard Trevi 3/4 Inch Ceramic Disc Flow Cartridge Anti-Clockwise Close
The A961087NU is a genuine Ideal Standard / Trevi 3/4 inch ceramic disc on/off flow cartridge used in selected bath taps, basin taps, bath fillers, bath/shower mixers and shower systems. It controls water flow and shut-off through the fitting and closes anti-clockwise.
A worn or damaged flow cartridge can cause poor shut-off, stiff operation or water continuing to drip from the tap spout or shower outlet after the control has been turned off. Correct identification is important because several similar Ideal Standard 3/4 inch cartridges use different part numbers and operating directions.
Technical Details
- - Part Number: A961087NU
- - Manufacturer's alternative code format: A 961 087 NU
- - Part type: ceramic disc on/off flow cartridge
- - Nominal size: 3/4 inch
- - Closing direction: anti-clockwise close
- - Total height: 59mm
- - Number of splines: 18
- - Spline diameter: 7.6mm
- - Fitting: 3/4" BSP
Hot and cold positions can vary between fittings, so identify the cartridge by its full part number, dimensions and operating direction rather than assuming its position from the tap or mixer layout.
Important Code Check
B961087NU is a different Ideal Standard part and is not the same as A961087NU. Check the complete part number carefully before ordering.
Confirmed Models Using This Cartridge
- - Armitage Shanks B9140AA Piccolo 21 two-taphole bath filler
- - Armitage Shanks B9141AA Piccolo 21 bath and shower mixer
- - Sottini B9699AA Rosita dual-control bath filler
- - Ideal Standard K6190AA Moments Shower Column 5 Function
- - Ideal Standard B8074AA Active pair basin pillar taps
- - Ideal Standard B8076AA Active pair bath pillar taps
- - Sottini B8428AA Rosita dual-control two-taphole bath/shower mixer with kit
- - Ideal Standard B7885AA Ceraplan SL bath pillar taps
- - Ideal Standard B7891AA Ceraplan SL dual-control two-taphole bath filler - GEN1 - historical/original A961087NU fitment
- - Ideal Standard B0163AA Senses Cube bath pillar taps - GEN1 - historical/original A961087NU fitment
Before Ordering
Check the existing cartridge code, 59mm overall height, 18-spline head, 7.6mm spline diameter, 3/4" BSP fitting and anti-clockwise closing direction before ordering.
Not sure this is the right cartridge? Use the Di Vapor part identification service.
Related Spares You May Need
- - TACSIL 3g Premium Cartridge Silicone Grease - WRAS Approved
Di Vapor accepts the following payments methods:
Di Vapor treats your privacy and security with the utmost importance. The payment systems used by Di Vapor are based on industry standards to ensure all payments are securely handled. In fact, we ensure the Di Vapor website is regularly checked to guarantee compliance to PCI security standards.