Franke 133.0251.375 Kitchen Tap Cartridge - F3540R/C - Anti-Clockwise Open
The Franke 133.0251.375 F3540R/C is a cold-side quarter-turn kitchen tap cartridge for selected two-handle Franke and Carron Phoenix kitchen taps. It is the anti-clockwise open cartridge, closing clockwise, and is used to restore shut-off and handle control on the cold side of the tap.
This ceramic disc tap valve is typically changed when the cold handle becomes stiff, will not fully shut off, or water continues to drip from the spout when the tap is turned off. Match the part code, handedness, spline count, thread and cartridge dimensions before ordering, especially where a tap range has production-date or variant-specific cartridges.
| Part Number | 133.0251.375 |
|---|---|
| Cartridge code | F3540R/C |
| Side | Cold |
| Operation | Anti-clockwise open |
| Close direction | Clockwise close |
| Turn | Quarter turn 90 degrees |
| Total length including bottom seal | 47mm |
| Diameter at widest point | 23.7mm |
| Top spline diameter | 7.8mm |
| Top spline teeth | 28 |
| Lower thread diameter | 27.8mm |
| Barrel diameter below lower thread | 18.5mm |
| Upper thread closer to spline | 23.7mm |
| Bottom seal colour | White |
Remove the existing cartridge and compare the spline count, spline diameter, thread diameter, overall length, bottom seal colour and open direction. This is the cold-side valve, so do not order it for the hot side unless the existing cartridge markings and operation match this exact specification.
We accept the following payment methods:
We use industry-standard payment systems to help keep your payment information secure. Our website and payment processes are regularly checked to maintain PCI security standards.