Summary

Carron Phoenix Aztec Cold Tap Valve - 52mm, 20 Spline Compatible Tap Cartridge. Half inch cartridge.

Frequently Asked Question: Carron Phoenix Aztec Tap Spares – Cold Tap Valve Compatible Cartridge

Question: Why does the cartridge in my Carron Aztec tap look different?

Answer: Small changes have been made on the Carron Phoenix Aztec tap spare cartridge throughout the years. This is why it is advisable to check the measurements of this spare part (a technical diagram is provided in the second photo above) and compare it with the one you have.

Should you have any questions or need help in spare part identification, please use our Find a Part free service. Our spares experts are here to gladly assist you.

*Messages received during the weekends will be responded to first at the start of the business week.

Question: How do I open the tap to replace the cartridge?

Answer: Here are the steps for installing the Carron Phoenix Aztec tap spare cold cartridge:

• Remove the blue indicator to access the grub screw.
• Loosen the grub screw using a hexagonal key and remove the handle.
• Grip an adjustable spanner on the nut of the old cartridge and turn it anti-clockwise to remove the whole cartridge.
• Grease the O-ring of the replacement Carron Phoenix Aztec tap cartridge and install it in the valve seat.
• Return the handle, screw, and blue indicator.

Other Carron Phoenix Aztec Tap Spares

Part number CP-AZ12 is the Carron Phoenix Aztec Hot tap valve.

All Carron Phoenix Aztec tap spares will be dispatched on the same business day when it is purchased before the 3:00 PM cutoff time.