Grohe Concetto 32659001 is the spare-parts configuration for the single-lever sink mixer kitchen tap (GEN3) produced from January 2015 to August 2018. This chrome single-hole mixer uses a low swivel spout and a single lever to control both water flow and temperature.
The mixer uses a 35mm SilkMove ceramic cartridge and a cast swivel spout with a 140 degree swivel range. Customers servicing this production version can use the Grohe spare parts below to replace the listed service components without confusing this generation with earlier or later 32659001 configurations.
| Brand | Grohe |
|---|---|
| Range | Concetto |
| Category | Kitchen tap |
| Product code | 32659001 |
| Generation | GEN3 |
| Production period | January 2015 to August 2018 |
| Finish | Chrome |
| Operation | Single lever |
| Installation | Single-hole deck mounting |
| Cartridge | 35mm SilkMove ceramic cartridge |
| Spout type | Low cast swivel spout |
| Swivel range | 140 degrees |
| Spout projection | 239mm |
| Tap-hole diameter | 34mm |
| Maximum mounting surface thickness | 60mm |
| Water connections | G 3/8 |
| Flow rate | Approximately 13 litres per minute at 3 bar |
| Minimum flow pressure | 0.5 bar |
| Recommended flow pressure | 1 to 5 bar |
| Maximum operating pressure | 10 bar |
| Maximum hot-water inlet temperature | 70 C |
| EAN | 4005176886713 |
Check that the mixer is marked with product code 32659001 and that its production period matches the January 2015 to August 2018 configuration. The same 32659001 model was produced with different spare-parts configurations at other dates, so identifying the correct generation before ordering is important.