Thermostatic Cartridge for Victoria Plum Aria Shower Bars | Victoria Plumb | SHS5

Summary

This cartridge is used in the following VictoriaPlum shower valves - Product Codes: SHS4 SHS5

SHS5-THERM-CART Victoria Plum thermostatic cartridge spare part fits in exposed valves:

• SHS4 Orchard Derwent round shower unit
• SHS5 Orchard Derwent square shower unit

Victoria Plum Thermostatic Cartridge Technical Dimensions

SHS5-THERM-CART has a 24 spline notch count. The overall length of the cartridge is approximately 91.5mm. The widest part measures about 34mm. Please check the image above for a complete measurement illustration.

This Victoria Plumb thermostatic cartridge replacement spare is qualified for next day delivery if it is purchased on a weekday before 3:00 in the afternoon.

Frequently Asked Questions: Thermostatic Cartridge Spare Part for Victoria Plum Exposed Shower Valve

Question: Water flow started to weaken. Is the thermostatic cartridge broken?

Answer: There are a number of reasons for poor water flow. Lack of water pressure can be one. Another possibility is mineral buildup. This can harden and clog the flow control or the thermostatic cartridge, even a shower hose. The flow rate of the shower must give around 24.5 liters per minute at 3 bar. Calcification requires thermostatic cartridge replacement.

Question: The cartridge in my shower looks somewhat identical. Will this fit?

Answer: Please send us a photo of the cartridge in question. We will try to find the matching one for your shower.

Question: Water pressure is too strong.

Answer: You have to install a pressure regulating valve, or pressure reducer if the water pressure goes beyond 5 bar. Pressure above the recommended 5.0 bar may damage the shower unit and the thermostatic cartridge.

Question: How to replace the cartridge?

Answer: Remove the handle. Use a hex key to remove the thermostatic cartridge. Layer a small amount of silicone grease on all the O-rings of the new Victoria Plum cartridge and install it in the valve seat. Return the handle and the screws. Please do turn off the hot and cold water supply prior to starting.

Question: What is the recommended temperature calibration for this Victoria Plum thermostatic cartridge?

Answer: How water temperature must not go above 80℃ (176℉). The recommended temperature with a water heater is 60℃ (140℉).

Question: The handle on my shower has gotten stiff. What should I do?

Answer: Handles can go stiff due to the calcification of hard water minerals which can affect the cartridge and the valve. You have to remove the handle and the cartridge to see the extent of the buildup.