Mira 1910.022 is the thermostatic cartridge assembly used in the post-February-2018 Element MK2 exposed shower valve family.
It controls the mixed water temperature inside the valve and is the main internal service part to replace when temperature stability is lost, flow becomes reduced, or the shower continues to leak from the head beyond normal run-off after shut-off.
Technical Details
- - Part Number: 1910.022
- - Part type: thermostatic cartridge assembly
- - Application: Element MK2 exposed thermostatic shower valve
- - Valve family details: thermostatic temperature control, reversed inlet supplies supported, 15 mm compression inlets, 0.1 bar minimum maintained pressure, 5.0 bar maximum maintained pressure, 10.0 bar maximum static pressure
- - Factory safe maximum temperature on the valve family: 41C
- - Helpful service note: blocked inlet filters can also cause reduced flow or unstable temperature, so it is worth checking and cleaning them when replacing the cartridge
Before you order check
- - Check the replacement part number is 1910.022.
- - Check your shower is from the post-February-2018 Element MK2 exposed range.
- - Check your shower matches one of the confirmed model pages below.
- - Do not order this cartridge for older Element variants unless your existing part and valve details match this MK2 exposed range.
Confirmed Compatible Models
- - Mira Element EV 1.1910.001
- - Mira Element Exposed Valve Only 1.1910.002
Related Spares You May Need
- - TACSIL 3g Premium Cartridge Silicone Grease - WRAS Approved - Single-use silicone grease sachet for lubricating cartridge O-rings and seals during installation.
Di Vapor accepts the following payments methods:
Di Vapor treats your privacy and security with the utmost importance. The payment systems used by Di Vapor are based on industry standards to ensure all payments are securely handled. In fact, we ensure the Di Vapor website is regularly checked to guarantee compliance to PCI security standards.