SUMMARY

Alpi Thermostatic Cartridge CR107C - AL-CR107C

Help Guide: CR107C Alpi Thermostatic Cartridge

The CR107C is the replacement thermostatic cartridge for various ranges of Alpi shower valves. The cartridge is held in the valve by a grub screw.

Please contact us if you have questions about the Alpi CR107C shower part or need assistance in spares identification. You can also reach us via WhatsApp (contact number: 07754 173340). We are looking forward to serving you!

Hello Di Vapor Valued Customer! This is a super short help guide about the Alpi thermostatic cartridge CR107C and some shower repair tips.


How to Tell if the Alpi Shower Needs a Replacement CR107C
The performance of the Alpi thermostatic cartridge CR107C can decline the longer (years) the shower is in use. The key drivers of the deterioration are:

1. Time.
2. The amount of calcified limescale from hard water.
3. An excess amount of water pressure.

The deterioration is manifested through shower valve problems concerning temperature control, leakages and an inadequate rate of water flow. It is necessary to replace the CR107C thermostatic cartridge when an Alpi valve begins to exhibit any of these symptoms.

If you begin to experience any shower valve problems related to the temperature cartridge, replace the Alpi thermostatic cartridge without delay. Prolonging may beget replacing the entire shower valve which is more expensive.


Alpi Thermostatic Cartridge CR107C: What You Need to Know
Since the CR107C fits in different Alpi shower models, it is crucial to take note of this spare’s measurements and estimate it with the measurements of the cartridge you need to replace. Remove the faulty cartridge from the valve. Use a simple ruler to take its measurements.

On counting the number of spline teeth: mark one spike with a pen and start counting. The number of spikes your cartridge has must be the same as the Alpi thermostatic cartridge CR107C.

Without further ado, here are the approximate measurements of the CR107C Alpi thermostatic cartridge:
Length: 89mm (8.9cm)
Diameter of Thread: 34mm (3.4cm)

Diameter of Large Spline Tier: 24mm (2.4cm)
Diameter of Top Spline Tier: 7.5mm (0.75cm)
Top Spline Teeth Count: 20

*Please pop us a message should you need further confirmation if the Alpi CR107C is the part for the shower you have to repair. (Our contact information is provided in the subheading above.)


Alpi Thermostatic Cartridge CR107C Simple and Basic Shower Repair Tips
– As with all shower repairs, never ever forget to isolate the valve’s hot and cold water supplies. This is to safeguard you from injuries that can be sustained from unintended water flow.

– Plugging or covering the drain will keep screws, washers and other small parts from falling in.

– Bear in mind the sequence and orientation of the parts as you remove it. This is especially important with regards to the “stop” part of the temperature stop ring. In reassembly, return the parts in reverse order and the stop ring’s “stop” in the same position.

– Layer a thin amount of grease on the O-rings of the replacement Alpi thermostatic cartridge CR107C. The grease will make it easier for the new cartridge to squeeze in the valve. Moreover, it can protect the O-rings from wearing out too soon.

Only silicone-based and heat resistant grease should be used. Please scroll to the last section of the page for the suitable plumbing grease.


Other spares we have in stock include:
+ Shower Door Handles
+ Shower Door Rollers
+ Shower Door Seals

+ Shower Mixer Valves
+ Shower Bar Valves


Why source your spares needs from us? Di Vapor provides:
+ top-quality spares at very competitive prices;
+ fantastic customer care and support;
+ secure and easy checkout;
+ and fast shipping.

The Alpi Thermostatic Cartridge CR107C (and all spares) purchased from Monday till Friday, before 3 PM, will be despatched on the same working day.

FAST DELIVERY

• Delivery of this item is priced as a 'small' packet. UK delivery costs £5.95.
• For all in-stock spare parts the typical UK delivery timescale is 2-5 working days.
• If you need a part urgently then we can provide a next-day (delivered Mon-Fri) UK delivery service for all in-stock small parcels ordered before 3.30pm, Monday - Friday.
• Next day delivery is available to select at an additional charge during the checkout.
• We delivery WORLDWIDE. For more information about international deliveries, read our delivery page.

RETURNS

• If you need to return a part then please telephone Di Vapor on 0121 705 0866 with the reasons for the return within 14 days of receiving the goods.
• For more information please see our terms and conditions.