The S9613NU Flow Cartridge is Used in the Following Models:
The S9613NU is a 1/2 inch Mk IV rubber-valve headwork for the specified Ideal Standard and Armitage Shanks taps and mixers. It is the internal valve operated by the tap handle to control and shut off the water flow.
This is a rubber-valve headwork, not a ceramic-disc or thermostatic cartridge. The same S9613NU headwork is specified for both taps in the Fairline basin and bath tap pairs listed below, so it should not be selected on the assumption that it is a cold-only valve.
| Part number | S9613NU |
|---|---|
| Component type | Mk IV rubber-valve headwork |
| Nominal size | 1/2 inch |
| Function | On/off water-flow control |
| Supplied as | One headwork, not a pair |
Check the exact model code and original valve construction before ordering. Where a model was available with different valve types, the applications below refer specifically to the rubber-valve version.
Confirm the tap model and compare the original headwork with the product photographs. The nominal 1/2 inch size alone does not establish fitment. S7158AA Alterna bath taps are described as 3/4 inch taps, but their specified internal rubber-valve headwork is the 1/2 inch S9613NU.
The S7300AA and S7500AA Millenia mixers also have ceramic-disc versions, which use a different headwork. Do not assume that S9613NU and the S9614NU ceramic-disc valve are interchangeable.
Use our Di Vapor part identification service for help finding the right part.
We accept the following payment methods:
We use industry-standard payment systems to help keep your payment information secure. Our website and payment processes are regularly checked to maintain PCI security standards.