PHL035 is a pair of 1/2" x 1/4 turn ceramic flow cartridges for Lefroy Brooks lever-operated tap and valve applications. This Di Vapor compatible spare pair is used to restore hot and cold water flow control where the original quarter turn ceramic cartridges are worn, stiff, seized or allowing water to pass when the tap or valve is turned off.
The set is intended for Lefroy Brooks lever models that use 1/2" quarter turn ceramic cartridges. Check the existing cartridge size, handle type, opening direction and the exact Lefroy Brooks model or spares diagram before ordering, especially where the same tap family was supplied in both lever and handwheel versions.
| Part code | PHL035 |
|---|---|
| Cartridge type | ceramic flow cartridge pair |
| Size | 1/2" |
| Operation | 1/4 turn |
| Supplied as | hot and cold cartridge pair |
| Application | selected Lefroy Brooks lever taps, basin mixers, bridge mixers, bidet mixers, pillar taps and wall valve applications using PHL035 |
A common symptom of worn flow cartridges is water dripping from the spout or outlet when the tap or valve is turned off. If only one side has failed, check whether the hot-side or cold-side single cartridge is required before replacing the pair.
Isolate the water supply before removal. Flush pipework and clean the valve body before fitting the new cartridges, as debris can damage ceramic discs. Apply suitable silicone grease to cartridge O-rings and bottom seals during installation.
We accept the following payment methods:
We use industry-standard payment systems to help keep your payment information secure. Our website and payment processes are regularly checked to maintain PCI security standards.