PAINI ASME A112.18.1UPC ANSI NSF61 KK GN90 - 52mm Height - Cold & Hot Side Pair of Cartridges

SUMMARY

PAINI ASME A112.18.1UPC ANSI NSF61 KK GN90 - 52mm Height - Cold & Hot Side

Please note that some batches say Paini on the cartridge and some don't, therefore you may receive one which doesn't have the text on the cartridge. The cartridge is still the ASME A112.18.1UPC ANSI NSF61 KK GN90 even if it isn't impressed upon the cartridges.

The Paini ASME A112.18.1UPC ANSI NSF61 KK GN90 is a 52mm hot and cold side pair of 1/2 inch BSP tap cartridges for restoring water flow control and shut-off on matching tap valve bodies.

This cartridge pair is used where the removed hot and cold cartridges match the 52mm overall height and 20 spline specification. Replacing worn flow cartridges can help resolve dripping from the spout, stiff operation or a tap that will not fully shut off, provided the original cartridges match the specification below.

Technical Details

- - Di Vapor Part Number: A112.18.1UPC

- - Cartridge size: 1/2 inch BSP

- - Overall cartridge height: 52mm

- - Number of splines: 20

- - Supplied as a hot and cold side pair

- - Cartridge marking: ASME A112.18.1UPC ANSI NSF61 KK GN90

Before Ordering

- - Remove and measure the existing cartridges before ordering, as similar PAINI ASME A112 variants are available in different heights.

- - Some batches may have Paini impressed on the cartridge body and some may not; this does not change the ASME A112.18.1UPC ANSI NSF61 KK GN90 identification.

- - Check the cartridge height, spline count and 1/2 inch BSP size against the removed hot and cold cartridges.

Installation Note

Isolate the water supply before removing the old cartridges. Clean the valve body seats and lightly lubricate suitable O-rings and bottom seals with silicone grease before refitting to help the cartridges seat correctly and reduce seal damage during installation.

Related Spares You May Need

- - TACSIL 3g Premium Cartridge Silicone Grease - WRAS Approved - Part Number: TAC86

- - PAINI ASME A112.18.1 UPC ANSI NSF61 NK KK GN90 (A112181) Pair of Cartridges - 56mm Height - Cold & Hot Side - Part Number: 56A112.18.1

- - Paini 53CR581GAD Filter Cartridge - Part Number: 53CR581GAD

- - Paini 53CC581AS Tap Cartridge Replacement - Hot Side - 20 Spline, 1/2 Inch Compatible 544 Valve (53CC581ASA) - Part Number: 53CC581AS

- - Paini 53CC581AD Tap Cartridge Replacement - Cold Side - 20 Spline, 1/2 Inch Compatible 544 Valve (53CC581ADA) - Part Number: 53CC581AD

FAST DELIVERY

• Delivery of this item is priced as a 'small packet'. UK delivery costs £5.95 incl. VAT.
• For all in-stock spare parts the typical UK delivery timescale is 2-5 working days.
• If you need a part urgently then we can provide a next-day (delivered Mon-Fri) UK delivery service for all in-stock small parcels ordered before 3.00pm, Monday - Friday.
• Next day delivery is available to select at an additional charge during the checkout.
• We delivery WORLDWIDE. For more information about international deliveries, read our delivery page.

RETURNS

• If you need to return a part then please telephone Di Vapor on 0121 705 0866 with the reasons for the return within 14 days of receiving the goods.
• For more information please see our terms and conditions.