Mira 451.23 Flow Cartridge for Fino and Verve Valves
The Mira 451.23 flow cartridge is a replacement flow control cartridge for selected Mira Fino and Mira Verve built-in shower valves. This cartridge sits in the valve body and controls the on/off water flow through the shower valve.
Use this part when the flow control side of the valve is worn, stiff, difficult to shut off or allowing water to pass when the shower is turned off. A common symptom of a failing flow cartridge is water dripping from the shower head after the valve has been closed.
| Mira code | 451.23 |
|---|---|
| Di Vapor Part Number | M-451.23 |
| Supplier code variant found for this assembly | 4.451.23 |
| Part type | flow cartridge / flow valve cartridge |
| Application | flow control side of selected Mira Fino and Mira Verve built-in shower valves |
| Supplier-listed diameter | 28.86mm |
| Supplier-listed length | 56.16mm |
| Supplier-listed material | brass |
| Supplier-listed spline teeth | 20 |
| Supplier-listed O-rings | 2 |
Check the cartridge code and valve variant before ordering. Earlier Mira Fino and Mira Verve B90A variants are shown with a different flow cartridge code, so do not order 451.23 from model name alone unless the valve version or existing cartridge has been confirmed.
Isolate the hot and cold water supplies before removing the old cartridge. Clean the cartridge bore and lightly lubricate the O-rings with WRAS-approved silicone grease before fitting to help the cartridge seat correctly and protect the seals.
We accept the following payment methods:
We use industry-standard payment systems to help keep your payment information secure. Our website and payment processes are regularly checked to maintain PCI security standards.