Heritage Bathrooms 20KD50084NT-WRAS 1/2 Inch Ceramic Disc Cartridge for Hartlebury Taps
Heritage Bathrooms 20KD50084NT-WRAS is a 1/2 inch quarter-turn ceramic disc cartridge used as a tap flow valve on verified Heritage Hartlebury basin pillar taps, bidet mixers and 3 taphole basin mixers where this exact cartridge is listed on the model spares page.
The cartridge controls water flow through the tap and closes clockwise. A common sign of cartridge failure is water dripping from the tap spout when the tap is turned off, poor shut-off or a handle that no longer controls the flow correctly.
| Total length including bottom seal | 47mm |
|---|---|
| Diameter at widest point | 23.8mm at thread |
| Top spline diameter | 7.6mm |
| Top spline teeth or notches | 20 |
| Lower thread diameter | 27.8mm |
| Barrel diameter below lower thread | 18.4mm |
| Bottom seal colour | white |
| Close direction | clockwise close and anti-clockwise open |
| Turn | quarter turn; 1/4 turn; 90 degrees |
Check the cartridge measurements, spline count, thread diameter and close direction against the cartridge being removed before ordering. Older or newer versions of the same Hartlebury tap range may use different spare parts.
Isolate the hot and cold supplies before removing the tap handle, indice, screw and shroud. Clean the valve seating before installing the replacement cartridge, and use a suitable silicone grease on the seals where required.
Model-page spares are finish and model dependent. Match the tap model code and finish before ordering handles, shrouds, wastes, rods, tails or decorative parts.
We accept the following payment methods:
We use industry-standard payment systems to help keep your payment information secure. Our website and payment processes are regularly checked to maintain PCI security standards.