This Hansgrohe 94008000-CS flow cartridge is a 1/2 quarter-turn ceramic on/off compatible spare supplied for Hansgrohe reference 94008000. It is the clockwise-open left-closing cold-side shut-off unit used in applicable Hansgrohe and AXOR basin mixer, bath mixer and concealed shut-off valve applications.
The cartridge controls start stop flow on the cold side and restores positive shut-off with a quarter-turn operating movement. A worn unit can cause dripping from the spout after shut-off stiff operation or poor cold-side flow.
Technical Details
- - Manufacturer reference: 94008000
- - Part type: 1/2 on/off quarter-turn ceramic flow cartridge
- - Function: cold-side shut-off and flow control unit
- - Operation: clockwise open
- - Handing: left-closing
- - Connection size: DN15 / 1/2
- - Installation note: use a 17 mm spanner or box wrench and lubricate the O-ring and lower seal before fitting
- - Important Note: You will receive the new version of the cartridge whereby the rubber at the bottom is black as opposed to white.
What to Check Before Ordering
- - Check the original reference is 94008000 or that your valve uses the left-closing cold-side quarter-turn cartridge paired with 94009000 on the opposite side.
- - Check the opening direction. This cartridge opens clockwise.
- - Check the valve spare diagram or existing cartridge because 1/2 size alone does not confirm fit.
Compatible Models
- - Hansgrohe Basic Set concealed shut-off valve family
- - Hansgrohe 37135000 AXOR Terrano 3-Hole Basin Mixer with Lever Handles DN15 01/10 - 09/10 Spare Parts
- - Hansgrohe AXOR Steel valve family
- - Hansgrohe 76443701 Finoris 4-Hole Rim Mounted Bath Mixer from 11/21 Spare Parts
- - Hansgrohe 71733140 Talis E 3-Hole Basin Mixer with Pop-Up Waste Set from 07/19 Spare Parts
- - Hansgrohe 72130000 Talis S 3-Hole Basin Mixer 150 with Pop-Up Waste Set 01/16 - 12/20 Spare Parts
- - Hansgrohe 47430000 AXOR MyEdition 4-Hole Rim Mounted Bath Mixer from 10/21 Spare Parts
Troubleshooting
- - Symptom: Water drips from the spout when the tap or valve is turned off. Likely Cause: Worn shut-off faces or seals in the cold-side flow cartridge. Solution: Replace the cartridge and grease the sealing points on installation.
- - Symptom: Stiff quarter-turn movement or poor cold-side flow. Likely Cause: Internal ceramic wear or seal drag. Solution: Replace the cartridge and check the mating valve body is clean before refitting.
Related Spares You May Need
- - Hansgrohe 94009000 1/2 On/Off 1/4 Turn Flow Cartridge Anti-Clockwise Turn On - opposite-hand shut-off cartridge commonly paired with 94008000 in the same valve body
- - TACSIL 3g Premium Cartridge Silicone Grease - WRAS Approved - use on the O-ring and lower seal when fitting the new cartridge
Di Vapor accepts the following payments methods:
Di Vapor treats your privacy and security with the utmost importance. The payment systems used by Di Vapor are based on industry standards to ensure all payments are securely handled. In fact, we ensure the Di Vapor website is regularly checked to guarantee compliance to PCI security standards.