Hansgrohe 92729000 3/4 Inch DN20 Flow Cartridge with Extender Spindle for Shower Valves
The Hansgrohe 92729000 is a 3/4" DN20 flow cartridge with extender spindle for use in Hansgrohe shower valve assemblies where this exact cartridge code is required.
This is a flow and shut-off control cartridge, not a thermostatic cartridge. It is used to control outlet flow through the valve and can help restore correct shut-off where the original flow cartridge has worn, seized or no longer closes fully.
Technical Details
- - Brand: Hansgrohe
- - Part code: 92729000
- - Di Vapor Part Number: HG-92729000
- - Cartridge type: flow cartridge / shut-off cartridge
- - Nominal size: 3/4" / DN20
- - Spindle type: extender spindle
- - Fitment style: screw-in
- - Finish / material appearance: brass
Before Ordering
Check the existing cartridge code, valve size and spindle layout before ordering. Do not select this part from the 3/4" / DN20 size alone, as matching the exact cartridge code and valve arrangement is essential.
Common Fault Symptoms
- - Symptom: water continues to drip from the shower head or outlet when the control is turned off.
- - Likely Cause: the flow cartridge seal or internal shut-off section may be worn or damaged.
- - Solution: replace the flow cartridge if the installed part matches Hansgrohe 92729000.
Installation Note
Isolate the hot and cold water supplies before removing the existing cartridge. Apply a suitable silicone grease to the O-rings and seals during installation to help protect the seals and support correct seating in the valve body.
Related Spares You May Need
- - TACSIL 3g Premium Cartridge Silicone Grease - WRAS Approved
Di Vapor accepts the following payments methods:
Di Vapor treats your privacy and security with the utmost importance. The payment systems used by Di Vapor are based on industry standards to ensure all payments are securely handled. In fact, we ensure the Di Vapor website is regularly checked to guarantee compliance to PCI security standards.