Crosswater AQ9357 1/2 Inch Hot Flow Cartridge for Mike Taps - Anti-Clockwise Close
The Crosswater AQ9357 is a 1/2 inch hot-side on/off flow cartridge associated with the Crosswater Mike tap range. This screw-in cartridge operates the hot-water supply and is designed to open clockwise and close anti-clockwise.
The cartridge controls water flow through the hot side of the tap and provides shut-off when the handle is turned to the closed position. A worn or damaged flow cartridge can cause water to drip from the spout when the tap is turned off, difficulty shutting off the water completely or stiff handle operation.
Technical Details
- - Part Number: AQ9357
- - Cartridge type: Hot-side on/off flow cartridge
- - Thread size: 1/2 inch BSP
- - Fitting type: Screw-in threaded cartridge
- - Closing direction: Anti-clockwise
- - Opening direction: Clockwise
- - Shaft length: 55mm
- - Threaded section length: 11mm
- - Measurement from O-ring to base: 22mm
- - Colour: Brass
- - Associated range: Crosswater Mike
- - EAN: 5055833631100
Before Ordering
Check the part number, hot-water orientation, closing direction, threaded connection and dimensions against the cartridge being removed. Crosswater has produced several different flow cartridges for its tap ranges, so a matching 1/2 inch thread alone does not establish the correct fit. The AQ9357 is intended for hot-water flow control and should not be confused with the separate cold-side cartridge.
Related Spares You May Need
- - Crosswater AQ9356 1/2 Inch Cold Flow Cartridge (On/Off) - cold-side counterpart with clockwise closing operation
If you are unsure which cartridge you need, use our Di Vapor part identification service for help.
Di Vapor accepts the following payments methods:
Di Vapor treats your privacy and security with the utmost importance. The payment systems used by Di Vapor are based on industry standards to ensure all payments are securely handled. In fact, we ensure the Di Vapor website is regularly checked to guarantee compliance to PCI security standards.