Basin Cartridge for Crosswater CG110FB1

SUMMARY

Crosswater CG110FB1 Hent Single Lever Mixer Cartridge for Basin Taps and Shower Valves

The Crosswater CG110FB1 is a Hent single-lever mixer cartridge used in selected Crosswater basin taps, bidet mixers, bath fillers and manual shower valves. It forms part of the mixer control assembly and regulates water flow and the mixture of hot and cold water as the lever is operated.

This ceramic disc cartridge is designed for Crosswater fittings that use the CG110FB1 Hent cartridge version. A worn or damaged cartridge can cause water to drip from the tap spout or shower head when turned off, make the lever difficult to operate or prevent the water temperature from being adjusted correctly.

Technical Details

- - Part Number: CG110FB1

- - Cartridge type: Hent single-lever ceramic disc mixer cartridge

- - Approximate diameter: 34.83mm

- - Approximate overall length: 70.09mm

- - Body material: Plastic

- - Body colours: Blue and white

- - Seals: Two O-rings

- - Application: Selected Crosswater basin mixers, bidet mixers, bath fillers and manual shower valves

Check Before Ordering

Crosswater has used different cartridge versions in some of the models listed below. CG110FB1 is the Hent version and must not be assumed to be interchangeable with the Kerox X1A030N or CGPRO110M cartridges. Check the existing cartridge's markings, overall dimensions, spindle arrangement, base profile and locating features before ordering. Matching the diameter alone does not confirm the correct cartridge.

Confirmed Compatible Models

The following Crosswater models have been identified as applications for CG110FB1. Fitment applies to assemblies fitted with the Hent cartridge version.

Design Range

- - Crosswater DE110DPC Design Basin Monobloc with Pop-Up Waste

- - Crosswater DE210DPC Design Bidet Monobloc

Kai Lever Range

- - Crosswater KL110DNC Kai Lever Basin Monobloc

- - Crosswater KL112DNC Kai Lever Tall Basin Monobloc with Fixed Spout

- - Crosswater KL116DNC Kai Lever Tall Basin Monobloc with Swivel Spout

- - Crosswater KL120WNC Kai Lever Basin 2 Hole Set

- - Crosswater KL210DPC Kai Lever Bidet Monobloc with Pop-Up Waste

- - Crosswater KL315FC Kai Lever Floor Standing Bath Filler Monobloc

- - Crosswater KL321WC Kai Lever Wall Bath Filler

MPRO Range

- - Crosswater PRO111DNC MPRO Side Lever Basin Monobloc

- - Crosswater PRO120WNC MPRO Basin 2 Hole Set Chrome

- - Crosswater PRO121WNC MPRO Wall Mounted 2 Hole Basin Mixer with Back Plate

- - Crosswater PRO210DPC MPRO Monobloc Bidet Mixer

Modest Range

- - Crosswater MO110DNC Modest Basin Monobloc

- - Crosswater MO112DNC Modest Tall Basin Monobloc

Other Confirmed Models

- - Crosswater CE121WNC Central Basin 2 Hole Set

- - Crosswater SL110DNC Slide Basin Monobloc

- - Crosswater WO110DNC Water Circle Basin Monobloc

- - Crosswater ZR06_110DNC ZERO 6 Basin Monobloc

Installation and Troubleshooting

Before removing the cartridge, isolate the hot and cold water supplies and release any remaining pressure. Inspect the cartridge housing for debris or damage, and check that the replacement cartridge is correctly seated with its seals and locating features aligned. Avoid overtightening retaining components during reassembly.

If the tap continues dripping after the lever has been closed, the cartridge's internal ceramic disc sealing surfaces may be worn or damaged. Restricted lever movement or inconsistent temperature adjustment can also indicate cartridge wear, although other faults within the mixer or water supply should be ruled out before replacement.

Related Spares You May Need

- - TAC86 TACSIL 3g Premium Cartridge Silicone Grease - WRAS-approved lubricant for cartridge O-rings and seals

- - Crosswater L9T011N-1 Retaining Ring - Used in selected Central, Kai and MPRO two-hole basin mixer assemblies

- - Crosswater L6T905C Cartridge Cover - Cartridge cover for the MPRO Basin 2 Hole Set including PRO120WNC

These retaining and cover components are model-specific and are not necessarily required for every cartridge replacement. Check the existing assembly before ordering additional parts.

Not sure which cartridge you need? Use the Di Vapor Part Identification Service to send us photos and measurements.

FAST DELIVERY

• Delivery of this item is priced as a 'small packet'. UK delivery costs £5.95 incl. VAT.
• For all in-stock spare parts the typical UK delivery timescale is 2-5 working days.
• If you need a part urgently then we can provide a next-day (delivered Mon-Fri) UK delivery service for all in-stock small parcels ordered before 3.00pm, Monday - Friday.
• Next day delivery is available to select at an additional charge during the checkout.
• We delivery WORLDWIDE. For more information about international deliveries, read our delivery page.

RETURNS

• If you need to return a part then please telephone Di Vapor on 0121 705 0866 with the reasons for the return within 14 days of receiving the goods.
• For more information please see our terms and conditions.