MS WRAS D40P-19D Shower Diverter Cartridge
The MS WRAS D40P-19D is a 40mm shower valve cartridge sold as a shower diverter cartridge for use in specifically dimensioned shower valve bodies.
This cartridge is used to control water routing through the valve. A common symptom of a worn diverter or control cartridge is poor outlet selection, water passing to the wrong outlet, or dripping from the shower head or spout when the shower is turned off.
| Part code | D40P-19D |
|---|---|
| Cartridge size | 40mm |
| WRAS approval number | 251215309 |
| WRAS section | 0440 Headworks |
| Listed application | headworks for installation into specifically dimensioned taps or shower valve bodies |
| Body material listed by WRAS | plastic body |
| Maximum working pressure listed by WRAS | 16 bar |
| Maximum operating temperature listed by WRAS | 85°C |
| Marking | MS, D40P-19D on body |
Before ordering, compare the existing cartridge with D40P-19D and check the diameter, body shape, port layout, spline or spindle detail, seal positions and valve body recess. Do not order from diameter alone because D40P-19D must match the valve body and operating arrangement.
When fitting a new cartridge, isolate the water supply, clean the valve body, remove scale or debris from the cartridge chamber and lightly lubricate the O-rings and bottom seals with WRAS approved silicone grease before installation.
We accept the following payment methods:
We use industry-standard payment systems to help keep your payment information secure. Our website and payment processes are regularly checked to maintain PCI security standards.