Lefroy Brooks PSP011 35mm Diverter Cartridge (Godolphin) - Compatible Spare

Summary

Lefroy Brooks PSP011 35mm Diverter Cartridge (Godolphin) - Compatible Spare

This spare part is the current cartridge used for the Classic range since mid-2007.

Diverter cartridge replacement is only necessary if water flows from both outlets at the same time or the cartridge is difficult to operate. If either outlet is 'dripping', replace the 'on/off' cartridge(s) or washer(s) in the supply mixer as appropriate.

1 Remove the fulcrum screw in a counter clockwise direction using a flat bladed screw driver (C). Mackintosh models have a 3mm set screw in the underside of the lever. Remove the set screw in a counter-clockwise direction using a 1.5mm hexagonal key.

2 Pull the lever off the spindle (D).

3 Remove the hex cap in a counter clockwise direction using a 28mm spanner (E). We recommend wrapping the flats of the spanner with suitable tape to prevent marking the decorative finish of the nuts.

4 Pull the diverter cartridge from the diverter body (F).

5 Fit a replacement diverter cartridge. There are two location pegs on the underside of the cartridge, locate these into the two holes in the diverter body. 6 Replace the hex cap and lever in the reverse order. The hex cap has an O-ring fitted to the slot in its base. Ensure the O-ring is in place before fitting the hex cap.