12mm Cartridge Spline Spindle Extender Adapter - 20 Spline to 20 Spline

SUMMARY

12mm Cartridge Spline Extender Adapter - 20 Spline to 20 Spline.

This will only work with cartridges that have 20 splines which have a diameter of 7.6mm. The extender will extend the existing cartridge by 12mm (1.2cm) when fitted.

These can be stacked on top of eachother, therefore if you need to extend the cartridge by 40mm, you can use 4 of this extender.

You will also need a screw to hold the extender in place. If you use 1 extender (i.e. extending the cartridge by 10mm), you will need a 20mm screw. However long you extend the cartridge, you will need a screw which is 10mm longer than the combined total extender lengths.

The spline diameter can vary by +-0.1mm

For example, if you extend if by 60mm (i.e. 6 stacked on top of each other), you will need a 70mm screw). All related screws are the following (for cartridges that use an M4 screw): DVM4x20, DVM4x30, DVM4x40, DVM4x50, DVM4x60, DVM4x70, DVM4x80, DVM4x90, DVM4x100

FAST DELIVERY

• Delivery of this item is priced as a 'extra small' packet. UK delivery costs £3.95.
• For all in-stock spare parts the typical UK delivery timescale is 2-5 working days.
• If you need a part urgently then we can provide a next-day (delivered Mon-Fri) UK delivery service for all in-stock small parcels ordered before 3.30pm, Monday - Friday.
• Next day delivery is available to select at an additional charge during the checkout.
• We delivery WORLDWIDE. For more information about international deliveries, read our delivery page.

RETURNS

• If you need to return a part then please telephone Di Vapor on 0121 705 0866 with the reasons for the return within 14 days of receiving the goods.
• For more information please see our terms and conditions.