Stern 233010 Csaba E
Send a photo of your item and we'll help confirm it.
Summary
Stern 233010 Csaba E
The Stern 233010 Csaba E is a touch-free, deck-mounted electronic basin tap for commercial washroom and lavatory installations using cold or premixed water. It is activated by a concealed infrared sensor built into the spout, and is supplied as the E version with 9V transformer power.
This electronic tap is designed for hands-free basin use where controlled water delivery, hygiene, and reduced contact are required. The chrome plated body includes an integrated sensor with low battery indication, and the filter should be checked if the tap shows reduced flow.
Technical Details
| Brand | Stern Engineering |
|---|---|
| Product code | 233010 |
| Product type | touch-free, deck-mounted electronic basin tap |
| Power supply | IP67 dual power input box, with 9V transformer |
| Water supply | cold or premixed water |
| Operating pressure | 0.5 to 8.0 bar |
| Maximum water temperature | 70 degrees C |
| Sensor range | preset 100mm, adjustable from 30mm to 120mm using the optional remote control |
| Security time | 90 seconds, adjustable using the optional remote control |
| Finish | chrome plated body |
| Overall height | 255mm |
| Outlet height | 155mm |
| Spout projection | 109mm |
| Base diameter | 50mm |
Before You Order
- Check the existing tap code is 233010 or Csaba E, before ordering.
- Confirm that the installation is deck mounted, and supplied by cold or premixed water.
- Confirm that a 9V transformer powered E version is required, rather than a battery powered B version.
- If water pressure is above 8 bar, a pressure reducing valve should be used.
Troubleshooting
- Symptom: reduced flow. Likely Cause: blocked filter or aerator. Solution: isolate the water supply, then clean or replace the affected filter or outlet component.
- Symptom: no water from the tap. Likely Cause: power supply issue, sensor range issue, solenoid connection issue, or debris in the solenoid. Solution: check the transformer connection, sensor position, wiring, and water supply before replacing parts.
- Symptom: water continues to run. Likely Cause: sensor reflection, debris, scale, or solenoid diaphragm issue. Solution: clean the sensor area, check for reflections, and inspect the solenoid assembly.
Related Spares You May Need
Fast delivery
- UK delivery: £5.95 incl. VAT for this small packet item.
- For all in-stock spare parts the typical UK delivery timescale is 2-5 working days.
- If you need a part urgently then we can provide a next-day (delivered Mon-Fri) UK delivery service for all in-stock small parcels ordered before 3.00pm, Monday - Friday.
- Next day delivery is available to select at an additional charge during the checkout.
- Worldwide delivery available — see our delivery page for details.
Returns
- 14 days 'risk-free' returns.
- Start a return within 14 days of receiving your order by calling 0121 705 0866 or using our contact page.
- Full returns information is available in our terms and conditions.
Payment methods
We accept the following payment methods:
- Card payments: Visa, Mastercard, Maestro, Discover, JCB, Diners Club and EnRoute
- PayPal
- American Express: available via PayPal guest checkout only
- BACS bank transfer
- Cheque: dispatch takes place once payment has cleared
Security
We use industry-standard payment systems to help keep your payment information secure. Our website and payment processes are regularly checked to maintain PCI security standards.
- Secure SSL encryption
- Your personal and payment details are protected
- Regularly checked for PCI security standards
