Flat Magnetic Shower Seal | 4-6mm/​8mm/​10mm Glass | 85cm/​1.95m Length

Summary

• Magnet Finish Colour: White
• Distance of magnetic seal to the glass - 10mm
• Seal fits onto glass 4-6mm, 8mm or 10mm thick
• Sold in 1.95 metre lengths
• Will be sent via courier in hard-walled tube
• Can be cut using very sharp large scissors, junior hacksaw, secateurs, pruning scissors
• Easy to install
• Sold individually, therefore if you need a complete door solution you will need to order two of this seal which will create a perfect seal for the shower door.
• Can be used on any brand of shower (including those below), however please check your measurements before making the purchase.

Possibly compatible with some of the following shower and bathroom brands and suppliers:

• Novellini
• Oceana
• Roman
• Selectra
• Showerlux

Magnetic shower door seals ensure the shower enclosure is watertight. It prevents not only water, but also steam, from seeping out of your shower area. Made of durable vinyl with a magnetic strip, this shower screen part can be used in any type of frameless shower door, including glass sliding doors. The right replacement magnetic seal is determined by the thickness of your shower door.

This product is flat and it is used for non-angled doors.

For angled doors:

• 2173GA6-85.
• The 90-degree angled magnetic shower door seal is part number 2168GA6-85.
• 2170GA6-85 is for 135-degree shower doors.

How to Install a Magnetic Shower Seal

When the seals on your shower screen are beginning to wear out and replacing it is unavoidable, here is a simple guide on how to change the shower screen part.

You can remove the old seal by pulling it out. With a glass scraper, clean the side of the door where the seal once was. Spray it with glass cleaner and wipe with a clean rag.

Measure the length of the door and cut the replacement seal accordingly:

• Use a junior hacksaw to cut the magnet and the seal.
• Use a box cutter or sharp scissors to trim all four edges of the seal.

Push the seal against the side of the shower door.

Frequently Asked Questions: Magnetic Shower Door Seal

Question: The seal is not staying attached to the shower door.

Answer: You can use a weatherproof silicone sealant. That type of sealant will prevent mildew growth.

Question: Will I get 2 seals in 1 order?

Answer: No only one strip per order. If you need two, you will have to order two.

Question: My shower door has a 1/4 inch gap glass to glass. Will this work?

Answer: Yes it can work with a quarter inch gap.