Di Vapor Folding Shower Seat With Legs | ABS Aluminium | Stainless Steel Legs

Summary

This is a sturdy wall mounted fold up shower seat which has been made to Di Vapor's high quality standards: We pride ourselves in the quality of our bathroom and disability equipment.

The white seat is ideal for a shower, bath or wet room especially for those who would benefit from mobility solutions, sitting down while showering including the elderly or disabled. That being said, everybody using the shower can use the seat and would be appreciated by able bodied adults and children alike.

The seat stands approximately 50cm high from the ground.

The fold up stool can fold up against the shower wall which means that it doesn't take up much room in the shower when it's not in use.

When the user wants to use the chair, simply pull down the seat and the legs will flip down and rest against the shower tray or wetroom floor. These legs give this chair extra support, strength and stability and can hold weight up to 180Kg's which is approximately 400 pounds or 28.5 stone.

The fold up seat is made of ABS white panels. The back puece which connects to the wall is made from a strong aluminium and the legs are made from stainless steel.

What's Included

• All wall fixings which include countersunk screws, stainless pins, wall plugs
• The seat, which includes the legs and back fixing wall bracket. This will arrive to you all connected together already.

Installation of the Bench Seat in the Shower

1. Position the shower stool wall brack onto the wall at the desired height which we recommend is at the height of the seat legs and mark the fixing hole position onto the wall.

2. Reposition the wall bracket and fix to the wall using the 5 screws included (or if screws aren't suitable for your type of installation, using your own solution). Before fitting the middle screw, position the centre cover fixing clip.

3. Push the two seat bracket inserts into the wall bracket.

4. Put the two seat bracket inserts and insert the two stainless steel pins, one from each site, ensuring that you insert the chamfered / bevelled end first.

5. Position and fix the two end covers using the two screws provided. Push the centre cover into position onto the centre cover fixing clip.

6. Installation complete.