Jaquar ZSN-CHR-032 Solenoid Valve

Summary

Jaquar ZSN-CHR-032 Solenoid Valve

The Jaquar ZSN-CHR-032 is an electrically operated solenoid valve used within compatible Jaquar electronic taps and sensor-controlled shower or basin systems. It sits in the water supply line and opens or closes automatically in response to signals from the control unit or sensor, allowing precise, hands-free water control.

Function

This solenoid valve uses an internal electromagnetic coil to lift or seat the valve mechanism when activated. During normal operation it allows water to flow only when triggered by the system logic. As the valve ages, internal seals or the moving core can wear or collect debris, which may result in slow response, incomplete shut-off, or water continuing to pass when the system is meant to be off.

Confirmed Compatibility

The ZSN-CHR-032 is specified for Jaquar electronic and sensor-operated installations that list this solenoid valve code in their technical or spares documentation. It should only be installed where the original solenoid matches this reference, as voltage rating, connection type and flow characteristics can differ between models.

Installation Notes

Before replacement, isolate the water and electrical supply. Remove the existing solenoid valve from the pipework or valve housing and fit the replacement in the same orientation, ensuring correct flow direction and secure electrical connections. After installation, restore power and water gradually and test operation through several on-off cycles.

When Replacement Is Recommended

Replacement is recommended if the tap or shower fails to open reliably, does not close fully, or if water continues to drip from the outlet when the system is off. Installing a new ZSN-CHR-032 solenoid valve restores accurate electronic control and reliable shut-off without replacing the full sensor or control assembly.