ID02058MANC is the related handle.
Inta ID02084/2 is a ceramic disc cartridge for the Inta LO985CP Sequential Lever Operated Contemporary Basin Mixer Tap.
This cartridge controls the tap's single lever sequential operation, allowing cold water to open first before progressively introducing hot water as the lever is turned.
Technical Details
- - Part Number: ID02084/2
- - Cartridge type: ceramic disc cartridge
- - Application: sequential lever operated basin mixer tap
- - Associated tap operation: cold to hot through 90 degrees of lever movement
- - Associated tap minimum operating pressure: 0.5 bar
- - Associated tap maximum operating pressure: 5.0 bar
- - Associated tap maximum inlet temperature: 65°C
- - Associated tap maximum basin thickness: 45mm
Confirmed Model
- - Inta LO985CP Sequential Lever Operated Contemporary Basin Mixer Tap
Common Faults
- - Symptom: stiff or uneven lever movement. Likely Cause: worn or scaled cartridge. Solution: isolate the water supplies and replace the cartridge.
- - Symptom: water continues dripping from the tap spout when turned off. Likely Cause: worn ceramic disc cartridge seal faces. Solution: replace the cartridge rather than dismantling the internal cartridge assembly.
- - Symptom: poor cold to hot progression through the lever movement. Likely Cause: cartridge wear, scale or debris inside the tap body. Solution: check the cartridge and clean the tap body before fitting the replacement.
Before Ordering
Check the tap model and existing cartridge code before ordering. This part is for the Inta LO985CP sequential lever operated basin mixer tap and should not be selected from appearance alone.
Related Spares You May Need
Di Vapor accepts the following payments methods:
Di Vapor treats your privacy and security with the utmost importance. The payment systems used by Di Vapor are based on industry standards to ensure all payments are securely handled. In fact, we ensure the Di Vapor website is regularly checked to guarantee compliance to PCI security standards.