Spares for Grohe Start Edge - Wash Basin Mixer Tap (Metal Lever, Water Saving Mousseur 5.7 l/min, with Plastic Pop-Up Waste Set 1 1/4, 28 mm ceramic cartridge, Tails 3/8 Inch), Size 159 mm, Chrome, 24201001
The GROHE 24201001 Start Edge is a chrome single-lever L-Size basin mixer designed for single-hole installation on a washbasin. This page identifies replacement components used to service the mixer, its internal water-control mechanism, mounting system and mechanically operated pop-up waste.
The metal lever controls water flow and temperature through a 28 mm ceramic cartridge. A worn cartridge may cause dripping from the spout when the tap is closed, poor shut-off or stiff lever movement. The tall tubular spout rotates through 360 degrees, while the mousseur shapes the outlet stream and limits the specified flow rate.
Technical Details
- - Brand: GROHE
- - Range: Start Edge.
- - Category: Basin mixer.
- - Product type: Single-lever basin mixer 1/2 inch L-Size.
- - Model code: 24201001.
- - Finish: Chrome.
- - Installation: Single-hole deck mounting.
- - Control: Metal single lever with integral temperature limiter.
- - Cartridge: 28 mm ceramic cartridge.
- - Spout: Tall tubular spout with 360-degree swivel movement.
- - Mousseur flow rate: 5.7 litres per minute.
- - Overall mixer height: 311 mm.
- - Spout outlet height: 208 mm.
- - Spout projection: 140 mm.
- - Mixer base diameter: 49 mm.
- - Required mounting hole diameter: 34 mm.
- - Maximum mounting-surface thickness: 30 mm.
- - Water connections: Flexible G3/8 connection tails.
- - Waste: Mechanically operated plastic pop-up waste set with G1 1/4 connection.
Model Identification
- - GROHE Start Edge single-lever basin mixer 1/2 inch L-Size 24201001.
Before You Order Check
Confirm that 24201001 is marked on the mixer documentation and compare the cartridge size, connection tails, mounting arrangement, spout dimensions and waste-control system. Similar GROHE Start Edge basin mixers may use different cartridges or waste components.