Stuart Turner 46498 Monsoon Universal 2.0 Bar Single Water Pump for Showers, Bathrooms, Houses and Apartments
SUMMARY
Monsoon Universal 2.0 bar Single pumps can beused in pairs to boost vented systems to pump hot and cold watersupplies independently, or as a single pump to boost a water supplyas required. Suitable for both positive and negative headapplications.
Monsoon Universal pumps do not require agravity flow of water to start.
Application
- Boosting hot water services to a common mixer where the coldsupply is mains fed.
- Boosting hot and cold supplies separately.
- Increasing water pressure to a combi boiler via a breaktank.
Technical Specification
| General | |
| Product code | 46498 |
| Guarantee | 5 years |
| WRAS approval | 1404701 |
| Features | |
| Pump type | Peripheral |
| Mechanical seal | EPDM / PTFE / Al. Oxide |
| Anti vibration feet | |
| Inlet strainer(s) | |
| Flexible hoses | 2 |
| Run on timer | 3 sec |
| Dry run protection | |
| Materials | |
| Pump body | Brass |
| Impeller | Brass |
| Performance | |
| Maximum head (closed valve) | 2.0 bar |
| Performance @ 9 l/min | 1.2 bar |
| Performance @ 18 l/min | N/A |
| Maximum flow | 18 l/min |
| Maximum static inlet pressure | 8 metres |
| Maximum static outlet pressure | 8 metres |
| Maximum working pressure* | 600 kPa (6 bar) |
| Maximum ambient air temperature | 40 °C |
| Min / Max water temperature** | Min 4 °C / Max 65 °C |
| Flow switch sensitivity (approx) | 0.6 l/min |
| Pressure vessel air pre-charge | 0.9 bar (13 psi) |
| Connections | |
| Pump connections | G ¾ male |
| Flexible hoses | |
| Connections (UK model) | G ¾ female x 22 mm push-in 300 mm long Isolating valves on all hoses |
| Connections (ROI model) | G ¾ female x 21 mm push-in 300 mm long Isolating valves on all hoses |
| Connections (Export model) | G ¾ female x G ¾ female 300 mm long |
| Motor | |
| Type | Induction, auto-reset thermal trip |
| Duty rating | Continuous (S1) @ 9 l/min and above |
| Electrical | |
| Power supply/phase/frequency | 230 V a.c./ 1 / 50 Hz |
| Current (full load) | 1.1 Amps |
| Power consumption | 250 Watts |
| Fuse rating | 5 Amps |
| Power cable (pre-wired) | 1.5 metres |
| Physical | |
| Enclosure protection | IPX4 |
| Length | 200 mm |
| Width | 162 mm |
| Height (excluding hoses) | 243 mm |
| Weight (including fittings) | 6.6 Kg |
* The maximum pressure that can be applied to the pump under anyinstallation conditions.
** A stored water temperature of 60 °C is considered sufficientto meet all normal requirements and will minimise deposition ofscale in hard water areas.
FAST DELIVERY
- Delivery of this item is priced as a 'medium' packet. UK delivery costs £9.95.
- This item will be dispatched from our UK warehouse in approximately 3 days. If you need this item urgently then please contact our office for availability.
- We delivery WORLDWIDE. For more information about international deliveries, read our delivery page.
RETURNS
- If you need to return a part then please telephone Di Vapor on 0121 705 0866 with the reasons for the return within 14 days of receiving the goods.
- For more information please see our terms and conditions.
Payment Methods
Di Vapor accepts the following payments methods:
- Visa
- Mastercard
- Paypal
- Maestro
- American Express (via PayPal guest checkout only)
- Cheque (must be cleared before dispatch)
- BACS
SECURITY
Di Vapor treats your privacy and security with the utmost importance. The payment systems used by Di Vapor are based on industry standards to ensure all payments are securely handled. In fact, we ensure the Di Vapor website is regularly checked to guarantee compliance to PCI security standards.