|Voltage / Hertz:||220V - 240V / 50Hz|
|Speed (Revolutions / Minute:||N/A|
|Heater Power (Watts):||N/A|
|Maximum Pressure (Mpa):||N/A|
|Air Volume (m3/min):||N/A|
|Noise Level dB (A):||N/A|
|Jets Quantity (pieces):||N/A|
|Recommended Water Depth (metres):||N/A|
|Water Volume Heating Capacity (Gallons):||N/A|
|Water Volume Heating Capacity (Litres):||N/A|
|Fitting Size (mm):||60.3mm or 63mm|
|Power Cable Length:||1.5 Metres|
|Pump Type:||Water Circulation Pump|
|Brands Used On:|
|Will ship to:||Worldwide|
|Suitable For:||Hot Tubs (i.e. Jacuzzi) , Whirlpool Baths, Small Swimming Pools|
|Water Protection Grade:||IP55|
|Other Information:||Please contact us for more information about 230V / 60Hz, 110V / 60Hz models before ordering.|
LX LP200 Pump 2 HP | Hot Tub | Spa | Whirlpool Bath | Water Circulation Pump | 220V/50Hz | 7.0 Amps.
Frequently Asked Questions: LX LP200 Pump 2 HP
The LX LP200 is a water circulation pump that can be used in hot tubs, spas, whirlpool baths, and even small swimming pools. It is a single speed (1 speed), 2 HP replacement pump with an ampage draw of 7 A, and is equipped with a TI.USA thermal protector. This water pump is one of the most popular pumps used with post-2008 hot tubs and spa systems in the UK by Chinese manufacturers.
What are the pump's dimensions?
The approximate total length of the LX LP200 pump is 42cm. The width is about 22.5cm. The height is 28 cm.
Where are the wet ends of this water circulation pump?
The pump has the wet end-suction located in the middle and the return is on the right side.
What is the flow value capacity?
The flow value of water pump LX LP200 is 13m (H max) and 535 litres per minute flow (Q max).
I need a replacement pump that can handle more than 535lpm. Do you supply it?
Di Vapor has a more powerful pump which has a maximum flow rate of 635 litres per minute: LX LP300
or LX WP
Can this replacement water pump be used in Sundance spas?
Yes, the LX LP200 is perfect for Sundance spas.
I need a pre-2008 replacement pump. Can you give me options?
Older pumps are known to have a wet end suction of 15mm (1.5cm) versus the 20mm (2cm) of the post-2008 replacement pump. Please send us a message
. We will gladly look for the replacement pump you need.
The replacement LX pump will be despatched on the same day when it is ordered:
+ on a weekday
+ before 3:00 PM.
Di Vapor carries many replacement water pumps.
â€“ Stuart Turner
Please visit our catalogue. Thereâ€™s a huge possibility we have exactly what you need.
Fast UK Delivery
Delivery of this item is priced as a 'large' packet. UK delivery costs £11.95. For more information about international deliveries, read our delivery page.
Di Vapor holds a large stock of spare parts. For all in-stock spare parts the typical UK delivery timescale is 2-5 working days. If you need a part urgently then we can provide a next-day (delivered Mon-Fri) UK delivery service for all in-stock parts ordered before 4pm, Monday - Friday.Next day delivery is available to select at an additional charge during the checkout.
If you need to return a part then please telephone Di Vapor on 0121 705 0866 with the reasons for the return within 7 working days of receiving the goods. For more information please see our terms and conditions.
Di Vapor accepts the following payments methods: Visa, Mastercard, Paypal, Maestro, American Express, Cheque and BACS.
Di Vapor treats your privacy and security with the utmost importance. The payment systems used by Di Vapor are based on industry standards to ensure all payments are securely handled. In fact, we ensure the Di Vapor website is regularly checked to guarantee compliance to PCI security standards.