| Manufacturer Model: | APW400-V2-G?with heater) |
| Qmax Litres/Min | N/A |
| Hmax (m): | N/A |
| Voltage / Hertz: | 220V - 240V / 50Hz |
| Power (KW): | 0.4 |
| Horsepower (HP): | 0.5 |
| Ampage: | N/A |
| Curves: | N/A |
| Speed (Revolutions / Minute: | N/A |
| Power (Watts): | 400 |
| Heater Power (Watts): | N/A |
| Maximum Pressure (Mpa): | 0.013 |
| Maximum Pressure: | 0.013 |
| Air Volume (m3/min): | 3.4 |
| Noise Level dB (A): | Less than 80 |
| Jets Quantity (pieces): | Designed to be used with approximately 12 to 24 Jets (however this is not a blanket rule as different jets have different exit hole diameters) |
| Recommended Water Depth (metres): | 0.6 |
| Water Volume Heating Capacity (Gallons): | N/A |
| Water Volume Heating Capacity (Litres): | N/A |
| Fitting Size (mm): | N/A |
| Weight (Kg): | 3.2 |
| Length (mm): | 380 |
| Width (mm): | 195 |
| Height (Kg): | 210 |
| Power Cable Length: | 1.5 Metres |
| Pump Type: | Air Blower Pump With Heater and Noise Reduction Kit |
| Brands Used On: | |
| Will ship to: | Worldwide |
| Suitable For: | Hot Tubs (i.e. Jacuzzi) , Whirlpool Baths, Small Swimming Pools |
| Certification: | CE, TUV |
| Water Protection Grade: | Type F Insulation |
| Thermal Protector: | TI.USA |
| Important Information: | "The ""V2"" in this pump's code means that it has a two stage impellar, WH in the code means that this air blower pump has a heater, the ""G"" in this pump's code means that this pump has a noise reduction kit." |
| Other Information: | Please contact us for more information about 110V - 120V models before ordering. |
LX APW400 V2-G Air Blower Pump 0.5 HP | (With Heater) 400W | Hot Tub | Spa | Whirlpool Bath | 220V/50Hz.
Important: This model does not come with an air switch and is supplied in the standard LX specification.
We accept the following payment methods:
We use industry-standard payment systems to help keep your payment information secure. Our website and payment processes are regularly checked to maintain PCI security standards.