| Manufacturer Model: | APR900-V1?with heater) |
| Qmax Litres/Min | N/A |
| Hmax (m): | N/A |
| Voltage / Hertz: | 220V - 240V / 50Hz |
| Power (KW): | See Power in Watts & Heater Power |
| Horsepower (HP): | 1.2 |
| Ampage: | N/A |
| Curves: | N/A |
| Speed (Revolutions / Minute: | N/A |
| Power (Watts): | 900 |
| Heater Power (Watts): | 180 |
| Maximum Pressure (Mpa): | 0.024 |
| Maximum Pressure: | 0.024 |
| Air Volume (m3/min): | 2.6 |
| Noise Level dB (A): | Less than 79 |
| Jets Quantity (pieces): | Designed to be used with approximately 16 to 32 Jets (however this is not a blanket rule as different jets have different exit hole diameters) |
| Recommended Water Depth (metres): | 1 |
| Water Volume Heating Capacity (Gallons): | N/A |
| Water Volume Heating Capacity (Litres): | N/A |
| Fitting Size (mm): | N/A |
| Weight (Kg): | 2.7 |
| Length (mm): | 275 |
| Width (mm): | 190 |
| Height (Kg): | 205 |
| Power Cable Length: | 1.5 Metres |
| Pump Type: | Air Blower Pump With Heater |
| Brands Used On: | |
| Will ship to: | Worldwide |
| Suitable For: | Hot Tubs (i.e. Jacuzzi) , Whirlpool Baths, Small Swimming Pools |
| Certification: | CE, TUV |
| Water Protection Grade: | Type F Insulation |
| Thermal Protector: | TI.USA |
| Important Information: | "The ""V1"" in this pump's code means that it has a single stage impellar, WH in the code means that this air blower pump has a heater" |
| Other Information: | Please contact us for more information about 110V - 120V models before ordering. |
LX APR900 V1 Air Blower Pump 1.2 HP | (With Heater) 900W + 180W | Hot Tub | Spa | Whirlpool Bath | 220V/50Hz
Note: this the electronic version - it does not have an air/pneumatic switch.
The APR900 pipe measurements are as follows:
The external diameter of the black thread (without white connector): 61.8mm
The external diameter of flat white pipe connecting union: 56mm
We accept the following payment methods:
We use industry-standard payment systems to help keep your payment information secure. Our website and payment processes are regularly checked to maintain PCI security standards.